Wake over LAN MSi Z87-G43

matt565

Honorable
Feb 14, 2014
5
0
10,510
I have this motherboard and I am trying to set it up so I can wake my computer remotely. I have PCI-E settings enabled and I have EUP2013 disabled, so I am not sure why it is not waking. I have sent packets while the computer is on to Magic packet to make sure I am receiving them and I am. I have no lights on on ethernet port. I have also contacted MSI and this is what they said: "We have tested here on similar boards and when the board is off or in standby the port LEDs will be off but the board does power on when the wake packet is received."

Thanks
 
Solution
From page 3-7 of the manual

Quote:
LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when "Onboard LAN Controller" is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
End quote

Try this.

Yogi
From page 3-7 of the manual

Quote:
LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when "Onboard LAN Controller" is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
End quote

Try this.

Yogi
 
Solution