Water cooling on wall mounted computer

[Fireger]

Hey guys
as the title says, ill be water cooling my computer which is wall mounted
I have all the components mounted onto a board with some acrylic
Was just wondering, with the radiators, how should i have the fans orrianted, and how far away from the acrylic do i need them?
Mainly so they dont heat up the acrylic to much, and there is also enough airflow for the heat to escape.
thanks in advance

 

[mrmez]

I always like high static pressure fans in a 'pull' config.
Obviously have the fans direct the air upwards so you aren't fighting convection.
That sort of heat near the acrylic should be fine.

 

[Fireger]

I always like high static pressure fans in a 'pull' config.
Obviously have the fans direct the air upwards so you aren't fighting convection.
That sort of heat near the acrylic should be fine.

What do you mean upwards? im mounting the radiator perpendicular to the ground, so i can either have fans pulling 'towards' the wall, or pulling away from the wall

 

[Albionm00n]

Greetings!

I would recommend that you have the fans direct the air away from the wall and toward the plex (into the room) for better heat dispersal, and an inch to 1 1/2" should be ample gapping from the plex.

Hope this helps!