Water cooling parts needed!

[yassinseoud]

So far I ordered:
Hardware Labs Black Ice GTX360 Radiator for PC Liquid Cooling
2 of Koolance VID-NX590 (GeForce GTX 590) Water Block NEW
XSPC 5.25" Bay Reservoir with Aluminum Faceplates (Black and Silver)

I need the remaining parts for my Corsair 650D build, I already have a H100 so I don't need CPU cooling parts.
Please list the parts from amazon as that is the only way I will be able to get it.

 

[yassinseoud]

Ok so I have chosen the
XSPC G1/4" to 1/2" ID, 3/4" OD Compression Fitting
and MCP 655 Pump
How many fittings do I need? And also will this tube work?
PrimoFlex Pro LRT UV Blue Tubing -1/2in. ID X 3/4in. OD (10ft pack)

 

[yassinseoud]

Also what are the remaining parts I need, I have the radiator, 5.25 inch resovoir, pump, tubing, fittings, water blocks for 2 Nvidia gtx 590s.

 

[rubix_1011]

Ok, I'm going to be honest, here. I am almost to the point of abandoning this thread. Please take the time and try to help us help you...it appears that you simply just want complete strangers to tell you what to buy, but there is very little communication back and forth on what is needed, what you actually understand you need and any kind of motivation to learn so we can better help you.

What radiator? For a CPU and 2 590's, do you realize how much you are going to need to dissipate from that loop? My guess is no.

 

[yassinseoud]

Ok, I'm going to be honest, here. I am almost to the point of abandoning this thread. Please take the time and try to help us help you...it appears that you simply just want complete strangers to tell you what to buy, but there is very little communication back and forth on what is needed, what you actually understand you need and any kind of motivation to learn so we can better help you.

What radiator? For a CPU and 2 590's, do you realize how much you are going to need to dissipate from that loop? My guess is no.

Don't need cpu cooling, already have h100

 

[yassinseoud]

Just want to know how many fittings I need and that will be all

 

[boiler1990]

You need 2 fittings per component (each has an input and an output)