[SOLVED] What do I do

[jamiewood1878]

Hi
I put a new graphics card into my pc ,when I turned it on a screen saying

The system found unauthorised changes on firmware operating system Press (ok) to run the next boot device, or enter directly to bios setup if there are no other boot devices installed. Go to bios setup> advanced> boot and change the current boot device into other security boot devices

But I really don’t know what to do I’ve looked on YouTube but there is nothing so if someone could help that would be great

 

[Andy11466]

You want to go into your bios and change your Graphics Display to run off of your PCI-E not your onboard graphics.

 

[Darkbreeze]

It should do that automatically unless it is a very old system. Plus, his message is in regard to a boot order problem, not a graphics card problem. Obviously the graphics card is working if he can see that message although whether or not it's using the integrated graphics or PCI card based on where the cable is connected is unclear.

Make sure you have moved the display cable to the monitor so that it is connected to the outputs on the back of the graphics card and not the motherboard. If you have done that, or after doing that, then reset the bios as follows.

I would recommend a hard reset of the bios.

Power off the unit, switch the PSU off and unplug the PSU cord from either the wall or the power supply.

Remove the motherboard CMOS battery for five minutes. During that five minutes, press the power button on the case for 30 seconds. After the five minutes is up, reinstall the CMOS battery making sure to insert it with the correct side up just as it came out.

Now, plug the power supply cable back in, switch the PSU back on and power up the system. It should display the POST screen and the options to enter CMOS/BIOS setup. Enter the bios setup program and reconfigure the boot settings for either the Windows boot manager or for legacy systems, the drive your OS is installed on if necessary.

Save settings and exit. If the system will POST and boot then you can move forward from there including going back into the bios and configuring any other custom settings you may need to configure such as Memory XMP profile settings, custom fan profile settings or other specific settings you may have previously had configured that were wiped out by resetting the BIOS CMOS settings.