What do I plug this fan controller into? (pics)

[Digget]

Hi,

New to building a pc. I have a Deep Silence 1 case with 2 fan controllers powered by a 4 pin molex. Pics below.

3 pin fan connectors hooked up to the fan controller

4 pin molex also hooked up to the fan controller

The back of my psu

Is there a cable that will connect the male molex to the psu?

There's a 4 pin molex power cable already connecting the motherboard to the 6 pin "PERIF 1" slot on the PSU (for the graphics cards). I noticed this cable has 2 female 4 pin molex connectors on it. Should I plug the fan controller into that?

Cheers.

 

[Suztera]

Yes you plug a molex cable to the fan controller to power it.

 

[Digget]

Yes you plug a molex cable to the fan controller to power it.

How would I connect the fan controller's male molex to the pictured psu? Is it a problem using the same cable that's also connecting the motherboard (gpu's) to the psu?

 

[Suztera]

Yes you plug a molex cable to the fan controller to power it.

How would I connect the fan controller's male molex to the pictured psu? Is it a problem using the same cable that's also connecting the motherboard (gpu's) to the psu?

You not meant to use the molex cables for the GPU. You already have the 6+2 PCIE cables supplied that should be plugged into the VGA slots. You don't need the molex adapter that came with your gpu.