What does it take to keep a i7 4790k cool at 4.5ghz?

Page 2 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.

gasolin

Distinguished
Aug 6, 2012
568
3
19,015
Atm i use a thermalright macho zero with the fan from my true spirit 140 (140mm ty-147) and get 70 degrees using asus realbench and with prime 95 max heat the temperature is in a few sec about 95 degrees.

My cpu is oc'ed to 4.2 ghz on all cores and 1.20 volt.

What does it take to get a i7 4790k to run at 4.5 ghz and less then 80 degresse at max load, without the cpu cooler sounding like a hairdryer (i don't want to imagine what i would need to get max 80 degrees at 4.5ghz using prime 95)
 



No, i have tried it and i didn't notice a big enough difference, so i just use my corsair af quiet 140mm fan to suck out all the warm air inside of my cabinet as it is surpose to do.
 


Your H100i was probably broken. My user experience was excellent and cooled my 4790k at 4.5Ghz a constant 80℃ for 16hrs straight under real world stresses. Also kept my 4770k between 75℃-85℃ in real world conditions at 4.8Ghz for much longer in real world and synthetic conditions.

Keep in mind that if you're, trying to overclock, not all cpu's will be able to achieve high clock speeds because of the way they are assembled. Until they are manufactured mechanically and not by hand they will always be that way.
 
Luis: What voltages?

H100i on a i5-4690k @ 4.5ghz is yielding pretty mediocre results. 1.22v isn't that much... I feel like the H100i should be doing better than 75-80 during stress testing and bench marking. I was hoping to turn the voltage up to at least 1.27v, but last time I did that, temps went 90+. Feel like big air would've been more effective (cost, sound and cooling), but I could be wrong.
 


Interesting. I've been struggling with stock temps on my 4790k and have just ordered the Phanteks hoping it will drop my temps somewhat. I'm slightly concerned it's not going to have much impact. Currently my idle temps are 30C and load with Prime95 v26.6 small FFTs for 10 mins is 87C (ambient temp 19.5C) but I don't have a very hot graphics card in it yet, I'm using my old 7600GT (which is at 46C) until I can afford a GTX 970. Thanks for the post.

ps. Interestingly, I read a test review that claims "The two Corsair AF140 fans work wonders with the Phanteks heatsink in the quiet 800RPM mode, surpassing the Noctua and Phanteks heatsinks by 5°C at the same speed. That's impressive." http://www.xbitlabs.com/articles/coolers/display/noctua-nh-d15_5.html#sect0 They were AF fans so I'd assume SP fans would be even better?
 
MikeUk,

I think that 4Ryan6 and I have already weighed in on this topic in your other thread.

Almost any aftermarket cooler is better than Intel's stock cooler, and the Phanteks that you've ordered is an excellent air cooler.

Trust my advice ... the difference over the stock cooler will be huge, so relax. This is all going to work out great for you! 😀

CT :sol:
 

TRENDING THREADS