What ram should I get ??!

cpuNOz

Distinguished
May 14, 2002
40
0
18,530
0
Yo, I am geting a asus P4S533 mobo with a P4-1.6a chip and want to run it at 2.4 if I can or adleast 2.2. What ram should I use for this oc speed ?? Board specs are:
Intel® Socket 478 Pentium® 4 processor support up to 2.4GHz and beyond
533MHz front-side-bus
SiS® 645DX chipset
3 DIMMs up to 3GB of PC2700/PC2100/PC1600 DDR memory support
C-Media CM18738 6-channel audio
Optional Integrated SiS® LAN controller
AGP 4X slot, UDMA 66/100 ~THIS IS A TYPE/O I THINK IT ALSO SUPPORTS ATA 133!!
MuTIOL® bus advanced I/O technology
Optional SPDIF interface module
6 PCI, AGP 4X slot, up to 6 USB ports
ATX form-factor
I'll be getting the ram from here :http://www.atic.ca/RAM.htm
THANKS
 

pr497

Distinguished
Oct 21, 2001
1,343
0
19,280
0
samsung pc2700 ram...will overclock well...
if you wait...samsung pc3200 ram will come out soon...but samsung pc2700 ram is good.

<b><font color=red>ATI</font color=red>'s drivers are like a broken faucet, they both keep on leaking...</b> :cool:
 

bum_jcrules

Distinguished
May 12, 2001
2,186
0
19,780
0
I posted a reply I got from Allen Gu over at Asus on the Cooling thread. He said that you should get the P4S333. Go with PC2700 from Corsair.

<b>"Sometimes you can't hear me because I'm talking in parenthesis" - Steven Wright</b> :lol:
 

pr497

Distinguished
Oct 21, 2001
1,343
0
19,280
0
the P4S333 has the sis645 chipset.
the P4S533 has the sis645DX chipset...which is a modified version of the sis645 chip...the dx is slightly faster than its predecessor.

<b><font color=red>ATI</font color=red>'s drivers are like a broken faucet, they both keep on leaking...</b> :cool:
 

bum_jcrules

Distinguished
May 12, 2001
2,186
0
19,780
0
pr497 is correct but I do not know the specs on either Chipset. If the DX runs AGP 2.0 Universal than you <b>should</b> be able to run the 3.3V Voodoo card through it. But that is a should and not a will be able to. That is why I contacted Asus.

Thanks for choosing ASUSTeK.

You can choose our P4S333 series motherboard which support both AGP 1.5V and AGP 3.3V.s

Best Regards,
ASUS Customer Service Center Shanghai
So I will ask again if you can use the 645DX chipset.

BTW: If anyone knows where I can get a hold of the white sheets I would greatly appreciate it.

<b>"Sometimes you can't hear me because I'm talking in parenthesis" - Steven Wright</b> :lol:
 

pr497

Distinguished
Oct 21, 2001
1,343
0
19,280
0
the P4S333 and P4S533 motherboards are essentially the same board...just with different northbridges...
whatever the P4S333 supports...the P4S533 will support it too...

<b><font color=red>ATI</font color=red>'s drivers are like a broken faucet, they both keep on leaking...</b> :cool:
 

TRENDING THREADS