WHAT SHOULD I HAVE WITHIN MY SERIAL BUS CONTROLLERS

stonepicker

Distinguished
Feb 7, 2012
88
0
18,630
I still have a USB driver problem as listed in this forum, (DRIVER PROBLEM ? any help please)

In my universal serial bus controllers section within my medion akoya computer windows 7 64bit - I find several items duplicated for example
standard enhanced pci to usb host controller.....x 2
standard open hcd usb host controller .....x 5
usb root hub.......x 7


PS may I appologise for posting this in capitals, just a simple error didnt mean to disregard toms rules ...sory
 
Hello stonepicker;

What you have is 'normal' and expected.
Those are not exactly duplicates - each category has a separate function.
While each category has multiple connections - that is a very good thing for redundancy.

USB Hub Controller / standard enhanced pci to usb host controller.....x 2
USG Host Controller / standard open hcd usb host controller .....x 5
USB Hub / usb root hub.......x 7
 




Thanks,

I am still trying to find an answer to my USB driver problem and have questions regarding the Disk Manager

NB I have no devices plugged into any usb ports

but in disk manager there are FOUR devices listed under volume

top two dont seem to open and may not exist - virtual only ?
next is boot c which seems correct
next recovery d which seems correct

if I click top one I get only the Help signal coming up (any type of click)
If I click second one down it will allow me to do such things as allocate a letter to it, this I have tried and it will then show up in devices and printers but will not open being something of a goast removed only by deleting the letter from that item in disk manager.
In devices and printers there exist another entry llisted as
Generic cf card reader usb device - this dosnt seem to exist either and I dont know how to remove it. (I suspect this is the top device shown in disk manager)
(this item has the yellow triangle and exclamation mark - this flag comming up for any usb stick I enter - all fail to find drivers even though all is advised as up to date etc

Can you help me in the matter or the driver problem matter
 


Computer is medion akoya ps325 d md 8351
medion multi touchscreen monitor
medion mouse and keyboard
have nothing pluged into the usb ports
have a hp printer connected only

Can you read thru the driver failure thread shown below with a blue flag next to listings

you will see that I my memory sticks and any storage device are failing to connect correctly ie the drivers fail etc but the ports work ok with toher items such as webcam and mouse and sticks are ok in other computer.

on windows 7 64 bit as supplied with computer new mid last yr, not used much nor nessed about with.
have spyware etc provided by contract with internet provider
have run security check nothing showing

thanks for any help



PS The other listing Showin in thread listings windows 7 drivers forum next to a blue flag is

Memory stick not working in USB

thanks
 
Only you see your blue flags - my blue flags will be for topics I've posted in
Red flags for topics we've each read.
Just past the page address for your topic into the post and I'll be able to find it.

Ports work OK with some things? Drivers must be OK for that to happen, yes?
 
Webcam/mouse work correctly in USB ports - So USB ports are working normally.
USB flash drives do not work in USB ports. But USB flash drives work OK in other computers.
USB ports are good - Flash Drives are good.

To me, it looks like it's a Windows 7 problem. Not drivers.
 
Sory I am feeling myu way ahead with this forum and problem solving method

My other listing was in forum windows 7 drivers under

Memory stick not working in USB



Other items such as web cam find a driver and its ok but any memory stick including dongle and mass storage drives get a failure
The item will show up in devices and printers section but will have yellow triangle and exclamation mark on them.
as you will see from other listing I have tried removing them installing the latest drivers from facilities offered by computers guide but everything showing correct but still failing despite on and off of computer etc.
In this thread after your first repply I have listed a phantom which I cant remove etc maybee its something to do with this and its listings
 
Following the computers help system i Found disk manager from start rh click computer disk manager is located


Start-Rh Computer-Maneger-storage section for Disk Manager.

I have only been in this section looking for a problem - I needed to try allocating a number to the device to see if that was the problem but it wasnt.
I am querys to see if this section is actualy correct from other peopls knowlege, I have never been this road before, but will correct the problem given the help and tools needed
 
So you're talking about Computer Management and it looks something like this?
qCDuj.jpg
 
Provide details on the 'top two'
 



Yes but the top two items dont seem correct please see my entry above in this thread.
I would post it on this repply like you have done but dont know how to do this



On the top two there is nothing except a small oblong blob I think which indicates a storage device, there are no storage devices currently intered in any usb port

If you tell me how you provioded the illustration of yours sent before, I will try and send copy to you
 



No
The entry is without number or description only the oblong shape
I will send it to you like you did if you can give the exact way I must do this.
 
To get a copy of your screen:
Start menu-> Accessories-> Snipping Tool
Use your mouse to draw a box around the area you want to capture - Click and hold the left button down to hilight the area you want. Release the button when you have the shape correct.
Save the image to your desktop.

Then you have to upload the image to a picture hosting site like: http://imgur.com
Upload the image from your computer. Then use the BBCode option and paste that into your post.

8HdTh.jpg

 
I can crawl thru barbed wire quicker..
I will try this out but it may be quicker for me to just type what I have on the screen.
I may be looking in the wrong direction with the problem I have - The computer sees the memory stick when plugged in then advised it cant get a driver etc as explained. The image of the stick will still show up but the warning triangle etc it shows thers some thing wrong and this is the bit I seem to be unable to find.
While you give this further thaught I will try out your advisory but dont hold your breath