Question What's up with this

[Leigh_2]

Like i said before I have Raspbian going but when i boot the raspberry Pi 3 B+ it does its loading and at then it ask me to login and hit Enter and then type "sudo raspi-confing. So I go through the configuration network setting and all of that and then Finish when does and pi@raspberrypi comes up below the configuration box. So I restarted the whole thing but takes me through the same steps. When i downloaded the raspbian on the computer, I used 7zip to extract the zip file to a disk image and used Etcher https://www.techspot.com/downloads/6931-etcher.html SO, do i need to try another writing tool. Hey, like i said, it boots and ask to login in and the type sudo raspi-config to configure my setting and that's all i get to. never got to the Raspbian desktop.
In other words, raspberry pi won't go to raspbian desktop

 

[AllanGH]

You may want to re-download the MicroSD image, and use a different tool to write the image to the card....Jessie would be a good one to go with, unless they have brought Stretch into the Raspbian universe by now.

Since this is your third thread on the same issue, I have to ask, have you tried posting this question on the Raspberry Pi forums?
https://www.raspberrypi.org/forums/viewforum.php?f=91&sid=8be41a79aac2bafee3ff5d9fe4ef8764