Where to change A8N-SLI Deluxe BUS Speeds in BIOS?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I noticed on windows startup in the nVidia display page, that my bus
speed says PCI Express x8, how can i change this to PCI Express x16?

Thank you!

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

tecknotot wrote:
> I noticed on windows startup in the nVidia display page, that my bus
> speed says PCI Express x8, how can i change this to PCI Express x16?
>
> Thank you!

I have an A8N-SLI myself and thought that the default setting was x16.
Do you think your vid card would run faster? Just curious. Could you
report your findings back to this NG?

I would assume that it is a BIOS setting.

Ron

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

tecknotot wrote:
> I noticed on windows startup in the nVidia display page, that my bus
> speed says PCI Express x8, how can i change this to PCI Express x16?
>
> Thank you!

Is your selector card set to SLI mode? If so then each PCI Express x16
slot only gets x8 bus width. In non-SLI mode the first slot should get
x16 and the other gets x1.

--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

No, I set my BIOS to NON-SLI Mode and the bus still reports x8 PCI
Express NOT x16 which i thought it should. This was with Bios BETA
1003-002 and 004 just came out so im going to play with that.


On Wed, 29 Dec 2004 17:47:21 GMT, Robert Hancock
<hancockr@nospamshaw.ca> wrote:

>tecknotot wrote:
>> I noticed on windows startup in the nVidia display page, that my bus
>> speed says PCI Express x8, how can i change this to PCI Express x16?
>>
>> Thank you!
>
>Is your selector card set to SLI mode? If so then each PCI Express x16
>slot only gets x8 bus width. In non-SLI mode the first slot should get
>x16 and the other gets x1.