Question Where to connect the ARGB Input cable?

[OMGPenguins]

Hello guys, so I’m putting together my first PC and got this ARGB INPUT cable form the case and I can’t find any slots in the motherboard only this one coming from the PSU, should I connect them?or is it for something else? Also got this SATA cable with same story.

https://imgur.com/a/zUibqWe

View: https://imgur.com/a/zUibqWe
(First pic is from the case and second pic from PSU)

https://imgur.com/a/xBUoHIO

View: https://imgur.com/a/xBUoHIO
(This is the SATA cable from the case)

 

[Lutfij]

Make and model of your case? Make and model of your motherboard?

 

[OMGPenguins]

Make and model of your case? Make and model of your motherboard?

The case:
https://altex.ro/carcasa-pc-segotep-lux-s-usb-3-0-fara-sursa-iluminare-rgb-negru/cpd/CSASGLUXS/
Motherboard:
https://www.msi.com/Motherboard/PRO-A620M-E

 

[Lutfij]

Take more pictures of where the wires terminate.

Your motherboard lacks an ARGB header even though your board has an RGB header and no, ARGB and RGB aren't cross-compatible with each other since they operate on two different standards.

You also picked one of the worst cases, since the front is blocked off of any ventilation for the fans to draw in fresh, cooler ambient air.

 

[OMGPenguins]

Take more pictures of where the wires terminate.

Your motherboard lacks an ARGB header even though your board has an RGB header and no, ARGB and RGB aren't cross-compatible with each other since they operate on two different standards.

You also picked one of the worst cases, since the front is blocked off of any ventilation for the fans to draw in fresh, cooler ambient air.

https://imgur.com/a/3rXAfLx

View: https://imgur.com/a/3rXAfLx

First 2 are from the case and last 3 from the PSU

 

[SkyNetRising]

Where to connect the ARGB Input cable?

Connect this way.

 

[OMGPenguins]

Connect this way.

https://imgur.com/a/MaIabhT

View: https://imgur.com/a/MaIabhT

So that one I just leave it like that then right? And thank you so much sir

 

[SkyNetRising]

So that one I just leave it like that then right? And thank you so much sir

Yes. Since your motherboard doesn't have appropriate aRGB connector, you leave it unconnected.

 

[OMGPenguins]

First of all thank you very much and second is ok for the fans of the case to not go off?

https://imgur.com/a/GOePj6K

View: https://imgur.com/a/GOePj6K

I’ll be honest the is no GPU in the pc yet (it hasn’t arrived) but I want to check if everything else is powered

 

[SkyNetRising]

First of all thank you very much and second is ok for the fans of the case to not go off?

Normally fans should be spinning.
How are fan cables connected?

Each fan should have aRGB connector and fan connector.
ARGB is for lights, fan connector is for powering up fan motor.

 

[OMGPenguins]

Or maybe an adaptor like this will help more?

https://imgur.com/a/scht05m

View: https://imgur.com/a/scht05m

 

[SkyNetRising]

Or maybe an adaptor like this will help more?

Can you find, how your pc case fans are connected?
Or if they are connected at all?

 

[OMGPenguins]

Normally fans should be spinning.
How are fan cables connected?

Each fan should have aRGB connector and fan connector.
ARGB is for lights, fan connector is for powering up fan motor.

https://imgur.com/a/28Bc7yx

View: https://imgur.com/a/28Bc7yx

There cables from the fans are also stacked like this

 

[SkyNetRising]

You connect that chain to a molex connector from PSU.

 

[OMGPenguins]

It spins, thank you so much