[SOLVED] Which Ram Should I Get For My Z490 Aorus Elite AC and 10600K Setup?

[thedevilofdark]

Only ones I can buy are these:

CMH32GX4M2D3600C18W (Also black one)
CMW32GX4M2E3200C16W
CMW32GX4M4D3600C16
PVR432G360C8K

I am really confused about Corsair's naming. Which one will be optimized (Works as advertised) for Intel?
I have 5000D case with 3x LL120 fans and ROG 3060Ti, using iCue software, so I think Corsair ones should be better for fashion. However, if Patriot is the absolute one, I will get it.

Also (For 4x8 GB one) I have Cooler Master 212 Spectrum air cooler.

 

[Koekieezz]

Only ones I can buy are these:

CMH32GX4M2D3600C18W (Also black one)
CMW32GX4M2E3200C16W
CMW32GX4M4D3600C16
PVR432G360C8K

I am really confused about Corsair's naming. Which one will be optimized (Works as advertised) for Intel?
I have 5000D case with 3x LL120 fans and ROG 3060Ti, using iCue software, so I think Corsair ones should be better for fashion. However, if Patriot is the absolute one, I will get it.

Also (For 4x8 GB one) I have Cooler Master 212 Spectrum air cooler.

well if you dont really care about memory overclocking/tuning, then get the one that you like and the cheaper option like CMH32GX4M2D3600C18W. but if you wanted to get into overclocking the Patriot viper rgb should do ok, it might either use hynix cjr or djr. if you want a b die on patriot, any kit at 3600 CL16 (or usually marked as 360C6 ) will do.

 

[thedevilofdark]

well if you dont really care about memory overclocking/tuning, then get the one that you like and the cheaper option like CMH32GX4M2D3600C18W. but if you wanted to get into overclocking the Patriot viper rgb should do ok, it might either use hynix cjr or djr. if you want a b die on patriot, any kit at 3600 CL16 (or usually marked as 360C6 ) will do.

Thank you for the reply. All of them are same price range, in USD differences are only 5-10$. Patriot's 360C6 or higher ones like 4000 ones (b-dies) are expensive.

Talking about latencies, isn't CMW32GX4M4D3600C16 good? I couldn't find what will be the die of it (not guaranteed I guess) I know it is 4x8 kit but my next CPU/MOBO/RAM upgrade will be DDR5 in few years.

 

[Koekieezz]

Thank you for the reply. All of them are same price range, in USD differences are only 5-10$. Patriot's 360C6 or higher ones like 4000 ones (b-dies) are expensive.

Talking about latencies, isn't CMW32GX4M4D3600C16 good? I couldn't find what will be the die of it (not guaranteed I guess) I know it is 4x8 kit but my next CPU/MOBO/RAM upgrade will be DDR5 in few years.

not all C16 is the same, B dies do C16 Flat, Hynix CJR/DJR or Micron E/N/16GBit B die does 16-19-19-39 usually if they're marked at cl16. Find out what ver. is the corsair kits if you could see it on the label. if it's ver 4.31, then congrats, a B Die. if 4.32, F, its a C die.

Tbh i would get anything cheap and worth the price for the performance rather tan going for B Dies.

 

[thedevilofdark]

not all C16 is the same, B dies do C16 Flat, Hynix CJR/DJR or Micron E/N/16GBit B die does 16-19-19-39 usually if they're marked at cl16. Find out what ver. is the corsair kits if you could see it on the label. if it's ver 4.31, then congrats, a B Die. if 4.32, F, its a C die.

Tbh i would get anything cheap and worth the price for the performance rather tan going for B Dies.

Cheapest one is 4x8 3600 CL16 one, then I will going for it. Thanks.

 

[thedevilofdark]

I got CMW32GX4M4D3600C16 , they seem to have Micron E-Die chips.

 

[Koekieezz]

I got CMW32GX4M4D3600C16 , they seem to have Micron E-Die chips.

Should overclock good, only tRCD that will wall you, better keep it at 18 or 19, depends on the timing.