Question Why Aorus GPU is not working ?

[Savitar]

GPU: Gigabyte Geforce GTX 1050 Ti 4GB G1
CPU: Intel Core i7-8700 Retail - (1151/Hex Core/3.20GHz
Motherboard: H370 AORUS gaming 3 wifi
RAM: HyperX Predator DDR4 64GB

Details: Although my GPU was working fine before i recently made an upgrade to my system besides my GPU, i conect the power cable correct, the Gpu slot is matching but still makes the well known beeping noise and my LED indicator of the VGA is on. Can anyone help?

 

[Deleted member 2731765]

Do you have the latest BIOS for your motherboard ? Which Power supply unit/model are you using for your rig ? Are you booting in Legacy or UEFI mode ? As a side note, have you also tried clearing the mobo's CMOS as well ?....This won't be always necessary, but in some cases it might help.

Anyways, are you getting the Monitor signal when you connect your GPU ? So if understand this correctly, you can't even BOOT your OS/system ?

 

[Savitar]

Ok 1 without my GPU if i conect the HDMI cable to my motherboard i can boot it up,2 i don't know if i am running the latest bios, (i just bought the motherboard), 3 my power supply has 850 watt and also the only thing that i have connected to my PSU is the mother my water-cooling pump and the GPU nothing extra (becides the fans for the cooling). As for the rest you asked me i don't know how to do them.

 

[Savitar]

Do you have the latest BIOS for your motherboard ? Which Power supply unit/model are you using for your rig ? Are you booting in Legacy or UEFI mode ? As a side note, have you also tried clearing the mobo's CMOS as well ?....This won't be always necessary, but in some cases it might help.

Anyways, are you getting the Monitor signal when you connect your GPU ? So if understand this correctly, you can't even BOOT your OS/system ?

Also i just checked on YouTube what is the UEFI and Legacy boot and i didn't mess with it yet in my bios settings so then i checked my bios settings (after i removed my GPU) And is running with legacy boot for compatibility. I will check right for the updates and how to cleat CMOS

 

[Geekthulhu]

Did you ever figure this out? I am running into the same issue.