Question Why is my gpu stuck at 300mhz pulling 250w?

[bmod]

My 1660 super is stuck at 300mhz while running furmark and games and pulling 250+ watts. I uninstalled MSI afterburner, used ddu to wipe drivers, installed most recent ones and its still not fixed. I reseated gpu multiple times in different slots and made sure the 12v connector was fully inserted. I also reflashed firmware and tried the gpu in other systems with the same result. Im not sure what else I could do to fix this problem. any suggestions?

 

[beyondlogic]

My 1660 super is stuck at 300mhz while running furmark and games and pulling 250+ watts. I uninstalled MSI afterburner, used ddu to wipe drivers, installed most recent ones and its still not fixed. I reseated gpu multiple times in different slots and made sure the 12v connector was fully inserted. I also reflashed firmware and tried the gpu in other systems with the same result. Im not sure what else I could do to fix this problem. any suggestions?

full system specs ?
cpu
motherboard
ram
psu etc

 

[bmod]

full system specs ?
cpu
motherboard
ram
psu etc

Xeon E5-2670v3
MSI X99A SLI Plus
16gb team group ram running 2133mhz
Corsair 500w psu
Also does it in a r7 2700x system

 

[beyondlogic]

Xeon E5-2670v3
MSI X99A SLI Plus
16gb team group ram running 2133mhz
Corsair 500w psu
Also does it in a r7 2700x system

you can try this method in command prompt run as administator

• Run the following commands:
  • nvidia-smi -h (to check if the command is recognized)
  • nvidia-smi --reset-gpu-clocks
  • nvidia-smi --reset-memory-clocks

 

[bmod]

you can try this method in command prompt run as administator

• Run the following commands:
  • nvidia-smi -h (to check if the command is recognized)
  • nvidia-smi --reset-gpu-clocks
  • nvidia-smi --reset-memory-clocks

first 2 went through successfully, third said my gpu didnt support it, but no change in clock speed or power consumption before or after a reboot.

 

[beyondlogic]

first 2 went through successfully, third said my gpu didnt support it, but no change in clock speed or power consumption before or after a reboot.

was this bought used ?

 

[bmod]

was this bought used ?

it was but ive had it for at least a year with no issues until now.

 

[boju]

The things you've tried I'd say it's time to let it go and replace it.

 

[bmod]

The things you've tried I'd say it's time to let it go and replace it.

thats what im starting to think