Why Isn't My New Computer Build Working?

[dkson0]

Hey, I just built a new computer. I am currently using the
"MSI A78M-E35 FM2+ / FM2 AMD A78 (Bolton D3) HDMI SATA 6Gb/s USB 3.0 Micro ATX AMD Motherboard"
(http://www.newegg.ca/Product/Product.aspx?Item=N82E16813130741)
I have everything connected and attached. Power is working fine because the power to my heatsink fan and optical drive are working. However when I connect the computer to a display it doesn't work. I am using the HDMI port to connect to the display instead of the VGA. Also when I connect my mouse and keyboard to the ports the power on the mouse and keyboard do not work. But i am sure the USB port is connected to the motherboard, also I tried the USB port on the back of the MOBO but it didn't power the mouse/keyboard. Could it be because the processor was incorrectly installed (I am 99% sure i did it right). What could be the possible problems?

Also Here Is MY Build:

Processor: AMD A10-5800K (http://www.newegg.ca/Product/Product.aspx?Item=N82E16819113280&cm_re=a10-5800k-_-19-113-280-_-Product)

Power Supply: Corsair CX 430 (http://www.newegg.ca/Product/Product.aspx?Item=N82E16817139049&AID=10657534&PID=3938566&SID=&nm_mc=AFC-C8JunctionCA&cm_mmc=AFC-C8JunctionCA-_-na-_-na-_-na&utm_medium=affiliates&utm_source=afc-%zn)

RAM: ADATA 8GB @1866mHZ (http://www.newegg.ca/Product/Product.aspx?Item=N82E16820211818)

Motherboard: MSI A78-E35 (http://www.newegg.ca/Product/Product.aspx?Item=N82E16813130741)

Optical Drive: (P.S. It works with power) (http://www.newegg.ca/Product/Product.aspx?Item=N82E16827135204&AID=10657534&PID=3938566&SID=&nm_mc=AFC-C8JunctionCA&cm_mmc=AFC-C8JunctionCA-_-na-_-na-_-na&utm_medium=affiliates&utm_source=afc-%zn)

Case: Corsair Carbide 200R (http://www.corsair.com/en/carbide-series-200r-compact-atx-case)

 

[Paul NZ]

Whats the CPU?

 

[ThatVietGuy]

http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html

 

[dkson0]

I just updated the components. Have a look

 

[Paul NZ]

Hmm well the BIOS should support the CPU. And the CPU does have integrated gfx by the looks of it

Did you connect the ATX 12v, 4 pin CPU and 24 pin ? Does it still run even tho you cant see anything?

You have switched it HDMI on whatever this is connected to right?

 

[ithelps]

http://pcpartpicker.com/p/BCGGHx

this is my build but I am using the stock cooler

 

[ithelps]

can someone help me my computer isn't booting up too

 

[ithelps]

http://postimg.org/image/xpyypgz13/

are you talking about this? but what can i do about it?

 

[Paul NZ]

You should create your own post ithelps not hijack someone elses. Looks at the sticker on the mobo ithelps under the barcode. What are the last 4 numbers?? If its under 106 update the BIOS using USB flashback

FX-8320(FD8320FRW8KHK,3.5GHz,8C,125W,rev.C0,AM3+) ALL 1006

It needs this BIOS to support the FX-8320

 

[ithelps]

I figured out the issue. come back to my thread.