[SOLVED] Will a cpu fan header work on a 3 pin rgb control hub

[Itsmechude]

Hello guys im in a bit trouble i have a cooler master argb hub and for the rgb to work i need a rgb header which my motherboard doesnt have and their is a cpu fan header which is not used and i was wondering if a pwm connector to 3 pin will solve my problem so the argb will work ill have some picture below

 

[Itsmechude]

https://imgur.com/a/QvninXP

View: http://imgur.com/gallery/QvninXP

 

[Itsmechude]

https://imgur.com/a/j1cZf6c

View: http://imgur.com/gallery/j1cZf6c

 

[Mtop]

No,
Fans and Lighting are seperate citcuits do not mix!
ARGB and RGB are different voltages do not mix.
You plug the HUB MB PWM to a Motherboard fan port.
No ARGB on MB then no lights.

 

[Zerk2012]

Hello guys im in a bit trouble i have a cooler master argb hub and for the rgb to work i need a rgb header which my motherboard doesnt have and their is a cpu fan header which is not used and i was wondering if a pwm connector to 3 pin will solve my problem so the argb will work ill have some picture below

That is a 3 pin ARGB connector their 5 Volt you can't use a fan connector.

What hub do you have?

 

[Itsmechude]

That is a 3 pin ARGB connector their 5 Volt you can't use a fan connector.

What hub do you have?

Hello im sorry for the late reply needed the help so im using a cooler masterfan hub and this is the i plugged it in

https://imgur.com/a/iCf5p0E

View: http://imgur.com/gallery/iCf5p0E

 

[Itsmechude]

No,
Fans and Lighting are seperate citcuits do not mix!
ARGB and RGB are different voltages do not mix.
You plug the HUB MB PWM to a Motherboard fan port.
No ARGB on MB then no lights.

Even tough im using a cooler masterfan hub?

 

[Zerk2012]

Even tough im using a cooler masterfan hub?

You need the 5 volt motherboard header for that hub for it to work and you said your board has none.