Will this motherboard be fine in the Fractal R4

[FirstAid]

I'm moving a pc to another case and want to know if this motherboard http://www.amazon.com/Alienware-Aurora-System-Mother-LGA1155/dp/tech-data/B005DSS5U6/ref=de_a_smtd will be fine in the Fractal R4. I believe the form factor is ATX, but I've seen it listed differently. Thanks.

 

[P1nnacle]

It is listed as an ATX board and it should work with your case selection. Note that some dell boards have special screw layouts or grounding pin areas that don't match up with normal ATX standards. You should check this before you try to change the case.

 

[das_stig]

Looks to be a standard atx, but a refurbished part, overpriced, but will fit.

 

[P1nnacle]

I've seen it listed as an ATX board, and that should work with your case selection.

Disregard this double post...

 

[FirstAid]

It is listed as an ATX board and it should work with your case selection. Note that some dell boards have special screw layouts or grounding pin areas that don't match up with normal ATX standards. You should check this before you try to change the case.

Thanks, I already have the board, but is there somewhere I could check to see if everything lays out correctly?

 

[P1nnacle]

It is listed as an ATX board and it should work with your case selection. Note that some dell boards have special screw layouts or grounding pin areas that don't match up with normal ATX standards. You should check this before you try to change the case.

Thanks, I already have the board, but is there somewhere I could check to see if everything lays out correctly?

This is a link to a screw hole layout sheet, for a general idea For the most part, look for any connectors on your board that don't line up with these holes. Also look for anything that looks like a metal hook that goes through one of the holes and that may be soldered onto the board.