Question Win 11 fresh reinstall

[PCHP]

HP 24 T pq 200 (blue screen) while trying fresh re-install win 11, I get a couldn't find any drivers, to get a strorage driver load driver message.
I tried on loading the Intel RST F6flpyx64 from usb and goes on and just won't load.
¿Can I try changing eufi from raid to ach for my drive to show and be able to reinstall it.
HP Laptop-dq200
Processor Type: 11th Intel Core i3
BIOS Revison F.21
Memory- Slot 1 NT
Slot 2 M4
Thanks

 

[Colif]

this might help - https://h30434.www3.hp.com/t5/Noteb...ST-VMD-Controller-9AOB-F6flpyx64/td-p/8426016

So do you have 2 drives as I can't tell if the alternate options means a laptop with 2 drives or if these are the choices for the drive in PC

Alternate Options
512 GB PCIe® NVMe™ M.2 Value SSD
1 TB PCIe® NVMe™ M.2 SSD

https://www.hp.com/us-en/shop/pdp/hp-laptop-14t-dq200-touch-optional-2d129av-1#techSpecs

I only ask as it shouldn't be in RAID if you only have 1 drive.
If you clean installing there is no reason you can't change it from RAID but nvme don't use AHCI either, they use PCIe

 

[PCHP]

Just that I saw a video fix that way on YouTube on a Dell PC, going from RAID On to AHCI/NAMe because Intel RST driver was not loading to be able to show any drives.
Keeping M.2 PCle SSD ON.
Just wanted to check before messing ir up even further. I am a novice in computer knowledge, let me describe my computer Hard Drive/SSD info:
HDD/SSD 1\2 Type NAMe - Capacity 238 GB
SSD Wear % 1
HDD/SSD 2\2 Type NAMe - Capacity 13.4 GB
SSD Wear % 0
While in CMD prompt X:sources I check diskpart then list disk and there'd no disk to show, and obviously no volume to show unless I connect a USB or an external DVD where I have a Wndows 11 Repair-Install-Recover-Restore created on another computer.
Hope I am not making it more confusing
Thanks

 

[Colif]

HDD/SSD 1\2 Type NAMe - Capacity 238 GB
SSD Wear % 1
HDD/SSD 2\2 Type NAMe - Capacity 13.4 GB
SSD Wear % 0

13.4gb is small. that only about 16gb unformatted... you don't have optane so not sure what that is?
238gb is the 256gb nvme drive, but unless its also seeing a USB drive, that 16gb is an anomaly.
https://www.hp.com/us-en/shop/pdp/hp-laptop-14t-dq200-touch-optional-2d129av-1#techSpecs


This was attached to the last link I showed, did you see it - https://h30434.www3.hp.com/t5/Noteb...o-Questions/Driver-for-Hard-drive/m-p/8421319

i think it shows you how to get the drivers the installer is missing so that it can see the drives. I think that also explains why CMD can't see them.

 

[PCHP]

F9 Boot Menu
OS Boot Manager (UEFI) -Windows Boot Manager (Intel Optane)
Plus USB - DVD when connected as a option to Boot.
X:\sources virtual drive - diskpart - list disk - list volume, shows no disks no volumes.
For what I do have no problems at all with my pc capability.
I will try the link provided once I have access to another computer to download and extract sp135979.exe correct.
Your support is greatly appreciated

 

[Colif]

okay, I understand raid now.
the install was on both the nvme and optane. Its possible the boot partition was on Optane and windows on nvme.

Raid makes both drives appear to be one drive to windows. Intel rapid Storage Technology does the rest. Likely need to install that on windows.

Now

let me describe my computer Hard Drive/SSD info:
HDD/SSD 1\2 Type NAMe - Capacity 238 GB
SSD Wear % 1
HDD/SSD 2\2 Type NAMe - Capacity 13.4 GB
SSD Wear % 0

where is that from? bios?

I think you need to perhaps ask on HP forums as what you need to do is install windows 11 as raid and load a driver from a USB (or possible integrated into installer, I am not sure what method the link shows to do it) so that the installer can see the "drive" and continue install