Win2k / Viper II / K7M / Driver Issues!

[Dantin1]

I'm new at this operating system and heres my prob. I boot normally and I get the dreaded Blue Screen of death with info that follows:
***STOP: 0x000000BE (0x8052A66A, 0x0052A121, 0xBFA87F9C, 0x0000000B)
An Attempt was made to write to read-only memory. This driver may be at fault:s3sav2km.sys

***ADDRESS: 8052A66A base at 80400000, Datestamp 39760637 - ntoskrnl.exe

Heres what I have. 128 Megs of ram running my virtual memory at 192MB. I have installed the AMD751 latest drivers that come with the 4in1 driver package. Minus the installation of the AGP because the only VIA chipset I have is that 686A series. I also installed AMD's 751 Mini Port Driver for Windows 2000. All drivers I got are Windows 2000. In addition to that I installed the win2k Registry setting for AMD AGP. Now after doing all that. I started getting that dang Blue screen and I have to boot into VGA MODE under the advanced start-up. Uggg.. Evil I say. Other than that I have everything else updated also. I guess my question is.

How can I remove the Registry Key for AMD AGP? And the AMD Mini-Port Driver? These were both listed as win2k files so I snagged em and installed them now I'm paying for it. Should I just re-install the operating system. I'm really really scratching my head on this one. I would like to upgrade to a 133 Mhz Bus Motherboard but I'm low on funds. I'm also getting a CAS2 PC-133 128MB DIMM for it also to see if this helps with paging issues. Well thanks in advance for the info. Gotta do some research meanwhile.

Dantin

 

[James35]

ya id do a reinstall had that happen to me too. u cant get around it properly to get it running like u want
dont put the mini port back in
just use the 4.31 sp2 and u should be kicking then

 

[Dantin1]

Well I would really really would like to see something that I can take the mini-port driver out. Took too dang long to download all that stuff on a 56k connection connecting at 37.2 according to Win2k. LoL.. I hate having to boot with VGA support. Last resort but I'm getting a bit edgy about the whole thing! arrggg

Dantin

 

[James35]

oh lol belive me i know what your going thru.

have spent four months trying to get this to run the way its supposed to, couple that with the via chipset, and its been pure hell. not sure what is going wrong half time.