Windows 10 installation and ram problem

mukund09

Commendable
May 7, 2016
13
0
1,520
Hey peeps ,
My motherboard had 4 gb ram for some time now so I purchased another ddr2 2gb ram to upgrade my system so I added it and wanted to install windows 10 on my PC. I saw the BIOS and it recognised 6gb ram.
So whenever I try to enter the windows 10 setup it says bad pool error and restarts my PC. So my motherboard's model no is (DG35EC Intel board )
So now setup is 2xtranscend 2gb ram 800 MHz
And 1 x hynix 2gb ram 800mhz
Graphic card - amd radeon 6670
Processor - Intel core 2 quad
So is the problem the uneven addition of ram or is it a windows error?
 
Solution


My first comment:
"Mixing RAM sticks is always a crapshoot."


No you do not need to fill all the slots.
The issue is the two completely different RAM sticks. Transcend and Hynix.

The issue is you are trying to change 2 things at once, and not knowing which is the problem.Win 10 or the mixed RAM.
Take the system back to a working state with the 2 original RAM sticks.

Does it boot?
Yes.
Then, install Win 10
Does it install?
Yes.

Later, you can play around with trying to add that other 2GB Hynix. But I wouldn't hold out much hope.