Question Windows 10 Installation On SATA SSD Doesn’t Work

[Brad_10]

So I just bought a new gaming rig and assembled it. (Specs down bellow)

I want to install windows 10 on my ssd, but the problem is that after installing windows on the ssd it restarts and goes back into the windows set-up.
Also when I’m in the bios before the windows installation my ssd gets detected in the boot priority but after I install windows on it there is no ssd being detected, only
the usb Stick with the Windows install media.

The windows media is not the problem since I successfully installed windows 10 on my hdd (Same gaming rig, just unplugged the hdd),
also when I was on the desktop my ssd got detected and worked.

I looked everywhere for answers but can’t seem to find one. Any suggestions will be greatly appreciated since I’m stuck in a loop of errors. Thanks in advance.

Things I tried:
-Changed CSM (Compatibility Support Module) to Enabled (UEFI only + UEFI drivers first) CSM Disabled, CSM Auto.
-Secure Boot: OS Type Windows UEFI Mode.
-Deleting keys. -SATA Configuration Mode to AHCI.
-Enabled all SATA Ports. -Converted the SSD to GPT format.
-Changing port slots for the ssd (although it gets recognized before installing the os).

Pictures of the BIOS settings (Note that some settings were changed in order to try and slove the problem

https://imgur.com/a/VinbNar

View: https://imgur.com/a/VinbNar


SPECS:
Rog Strix B450-F Gaming
AMD Ryzen 5 3600 6-Core processor
16gb DDR 4 3200mhz ram
Gtx 1070 ftw 8gb
2tb hdd 460gb
SanDisk 480 gb Sata ssd

 

[Brad_10]

u missed that clean command...its to wipe your current drive

I type the clean command, still Same error given

https://imgur.com/a/ZQBJMkZ

View: https://imgur.com/a/ZQBJMkZ

 

[kerberos_20]

okay type disk 1 again, it probably lost it

 

[Brad_10]

okay type disk 1 again, it probably lost it

I tried it again, restarted my pc just in case, same error, im really confused

https://imgur.com/a/Ews6HkT

View: https://imgur.com/a/Ews6HkT

 

[kerberos_20]

type list partition inside diskpart
post picture pls

 

[Brad_10]

type list partition inside diskpart
post picture pls

Here you go

https://imgur.com/a/dkfUCf8

View: https://imgur.com/a/dkfUCf8

 

[kerberos_20]

looks like u got 4k block
okay ill change commands, see that colored post with commands
btw convert gpt is only one time command, no longer needed, drive is GPT already 😉

 

[Brad_10]

looks like u got 4k block
okay ill change commands, see that colored post with commands
btw convert gpt is only one time command, no longer needed, drive is GPT already 😉

I ran into a small Problem, which one do I select ? And how ?

https://imgur.com/a/kbFG5Hz

View: https://imgur.com/a/kbFG5Hz

 

[kerberos_20]

create partition efi size=260
u missing efi
double check if typed text is correct

 

[Brad_10]

create partition efi size=260
u missing efi
double check if typed text is correct

Was almost done before running into some error.... I tried to name it on D still didn’t work

https://imgur.com/a/Ih8ii6K

View: https://imgur.com/a/Ih8ii6K

 

[kerberos_20]

ok removed that active, u can continue where u left, so far is good
drive letters can be corrected latter

 

[Brad_10]

ok removed that active, u can continue where u left, so far is good
drive letters can be corrected latter

Just before the last command line it got an error, smh :/

https://imgur.com/a/rFxWYwk

View: https://imgur.com/a/rFxWYwk

 

[kerberos_20]

Just before the last command line it got an error, smh :/

https://imgur.com/a/rFxWYwk

View: https://imgur.com/a/rFxWYwk

ye u got another typo
its:
0x
8
14 zeros
1
0x8000000000000001

 

[Brad_10]

ye u got another typo
its:
0x
8
14 zeros
1
0x8000000000000001

Sorry it’s kinda late in the hours for me, I did it and it worked here’s a picture

https://imgur.com/a/6ZpGzy7

View: https://imgur.com/a/6ZpGzy7

 

[Brad_10]

Sorry it’s kinda late in the hours for me, I did it and it worked although there are only 4 volumes ? here’s a picture

https://imgur.com/a/6ZpGzy7

View: https://imgur.com/a/6ZpGzy7

 

[kerberos_20]

can u list partition aswell?

 

[Brad_10]

can u list partition aswell?

How did I list it ?

 

[kerberos_20]

list partition

 

[Brad_10]

list partition

Oh okay , here is the pic

https://imgur.com/a/bVtWJnO

View: https://imgur.com/a/bVtWJnO

 

[kerberos_20]

ok that should work
u can reboot and install windows now

 

[Brad_10]

ok that should work
u can reboot and install windows now

So just to be clear and not do any mistakes. I close the cmd, boot my pc down, turn it on an let it go to the windows set up? Then do I click on the 444gb Partition to install windows ?

 

[kerberos_20]

So just to be clear and not do any mistakes. I close the cmd, boot my pc down, turn it on an let it go to the windows set up? Then do I click on the 444gb Partition to install windows ?

yup boot from usb install and choose that 444gb drive if it asks for it

 

[Brad_10]

yup boot from usb install and choose that 444gb drive if it asks for it

Okay I will try now

 

[Brad_10]

yup boot from usb install and choose that 444gb drive if it asks for it

So I installed windows 10 pro unfortunately to no avail... i let the pc restart for itself and it went back to the windows set up where i was in the beginning, also in bios no ssd detected in boot order options, im beyond puzzled...
Here is picture

https://imgur.com/a/bti4p22

View: https://imgur.com/a/bti4p22

 

[kerberos_20]

disable secure boot?

 

[Brad_10]

disable secure boot?

I don’t think I can disable it, only change between „windows uefi mode“ and „other os“. Maybe I’m wrong