[SOLVED] Windows 10 very frequent BSOD

[jack113256]

Hi everyone, this is my first post.

Im frequently getting a mixture of the following BSODs.

1. unexpected store exception
2. kernal data inpage error
3. Critical Process Died

They really occur randomly, sometimes right after startup or sometimes my pc would be fine for days then it might happen few times in a row after that.

Furthermore, no dumps are created (it was set to automatic dump creation and ive changed it to only create small dumps after that)
I checked the event viewer and it only provided this message: Dump file creation failed due to error during dump creation.
In the BSOD screen the progress is always stuck at 0% so i can only perform a hard shutdown to restart it

I also tried
-dism.exe /online /cleanup-image /scanhealth
-sfc scannow,
-chdsk
All showing no errors.

PC info
Device name LAPTOP-765RQL45
Processor Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz 2.80 GHz
Installed RAM 8.00 GB (7.89 GB usable)
Device ID A12893A6-2A52-485E-ABD6-3D150E64CED1
Product ID 00342-41379-19319-AAOEM
System type 64-bit operating system, x64-based processor

Display adaptors;
Intel(R) HD Graphics 630
NVIDIA Geforce GTX 1060 with Max-Q Design


Heres my crystalDisk info, the only thing i notice is that my SSD is 67 degrees celcius but im not sure if this is a cause for concern...
D drive (HDD) https://ibb.co/TMZq0zS
C drive (SSD) https://ibb.co/BKNzm8Y

Will appreciate any help

 

[Colif]

Hi, welcome to forums

max temp an evo runs at is 72c so its a little warm

unexpected store exception
the store in the error is used by virtual memory to track the locations of items in memory. Can be ssd or ram
kernal data inpage error
I think this is a page file error.
Critical Process Died
less obvious, there a number of files that if they crash, windows has to follow. Some of boot files, some are user related and some are system.

I would run samsung Magician on the ssd and check its health - https://www.samsung.com/semiconductor/minisite/ssd/download/tools/

just in case its ram
Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the BSOD. Remove/replace ram sticks with errors. Memtest is created as a bootable USB so that you don’t need windows to run it