Info Windows 11 Secure Boot No Signal - Gigabyte Motherboard

[volkanaavci]

Hello I am from turkey. I wanted to help you. No one has been able to solve this question.


Hello, I have migrated my computer to windows 11 operating system. I had to open secure boot to play Valorant. I opened it and got the message "No signal". I removed the bios battery, applied the CLR cmos method. It did not happen. I was able to get an image when I inserted another card into the computer. And I went into the bios and disabled the secure boot part. Even if you remove the bios battery or do the clr cmos method, secure boot does not turn off. But it closes manually. If you have such a problem, install another graphics card and fix the problem. Go into the bios and turn off secure boot.

 

[Colif]

No one has been able to solve this question.

We have seen it already, if you do the steps in post below, in the right order, it doesn't do the no signal thing.

Info - How to enable Secure Boot on AMD based Gigabyte motherboards

Note: If you are just enabling it to install Windows 11, its is not necessary. Windows 11 just needs PC to be able to run Secure boot, it doesn't enforce it. Valorant is a different story credit to COLGeek for instructions Steps to enable (all AMD-based Gigabyte mobos) Secure Boot. Make sure...

forums.tomshardware.com

thanks for your way to fix it though.
Another way is flash a newer bios onto board.