Windows 7 ISO Help?

[GigginsMcSwag]

As you can see on one of my other threads I asked how to put the Windows 7 ISO on a flash drive. I did it and I was wondering if I did it right. When I plug in the flash drive AutoPlay doesn't show up to run the setup of Windows and instead the Windows 7 ISO file is in the flash drive. Is this how it's supposed to be?

 

[CDdude55]

Try booting in like you would boot a disc image, so go into your BIOS and set your flash drive as first boot priority and the setup should start.

 

[GigginsMcSwag]

Try booting in like you would boot a disc image, so go into your BIOS and set your flash drive as first boot priority and the setup should start.

So after I tested the setup I can restart it, go back into the bios, and set the firt boot priority back to the hard drive?

 

[CDdude55]

After it installs yes, just pull the flash drive out and set the hard drive to your first boot device. You're system is taking the files on the flash drive and copying them over onto your drive of choice. Once that's done, it's bootable.

 

[GigginsMcSwag]

After it installs yes, just pull the flash drive out and set the hard drive to your first boot device. You're system is taking the files on the flash drive and copying them over onto your drive of choice. Once that's done, it's bootable.

Oh no, I'll be using this on a new PC. So with this one I can temporarily set it as the boot device, get to the first screen of setup, restart it, and set the boot device to the hard drive again.