So I built a new system, everything seems fine but for whatever reason Windows boots with no drivers installed and I can't seem to install them via USB - it brings up a compatibility issue. I replaced the board and the CPU but it is still giving me this weird compatibility error. When I try and install Windows 11 while Windows 10 is running it just doesn't open the setup and when I boot from the USB that I put the media creation tool on it just gives me a kernal error \windows\system32\ntoskrnl.exe and boots into Recovery mode.
I am at my wits ends, I have no idea what to do at this point, I have never run into anything like this and have been building PC's for about 2 decades now and was always able to figure out what was wrong but this is a tricky one.
If anybody can help, I have posted this thread before but the old one looks dead so I want some new eyes on this.
Thanks!
CPU: Core i5 13600k
CPU Cooler: Noctua DH-15
RAM: 32 Gb 2 sticks of 16, 5600hz Corsair Vengeance
Motherboard: Gigabyte Aorus Z690 Ultra
Graphics card: Onboard
Storage devices: 2TB WD m.2 SN850x
Power supply: Corsair RM 850
Case: Corsair 4000D Airflow
I am at my wits ends, I have no idea what to do at this point, I have never run into anything like this and have been building PC's for about 2 decades now and was always able to figure out what was wrong but this is a tricky one.
If anybody can help, I have posted this thread before but the old one looks dead so I want some new eyes on this.
Thanks!
CPU: Core i5 13600k
CPU Cooler: Noctua DH-15
RAM: 32 Gb 2 sticks of 16, 5600hz Corsair Vengeance
Motherboard: Gigabyte Aorus Z690 Ultra
Graphics card: Onboard
Storage devices: 2TB WD m.2 SN850x
Power supply: Corsair RM 850
Case: Corsair 4000D Airflow
Facebook
Twitter
Instagram