Question Windows failure from new gpu

Nov 10, 2019
7
0
10
I recently bought a new rx 590 to upgrade from a gtx 960. I used DDU in safe mode to remove my nvidia drivers and let ddu do its thing. After it shut off I switched in the rx 590 and turned the pc on. It booted into windows with no issues and was displaying in 720p. After about 5 minutes, when I was looking for amd drivers, the screen switched from 720 to 1080 and then froze. I reset the pc after the freeze and it wouldn't boot Into windows. It got stuck going into recovery mode. Any ideas what went wrong or how to fix it? I tried 2 different rx 590s multiple times with the same result.
 
Nov 10, 2019
7
0
10
full system spec? include make and model of the psu

I7 2600
Acer ipisb-vr rev 1.01 motherboard

Psu is stock from the original prebuilt. Gateway fx 6860. Think the specs are as follows:
750 watts - Quad 12V rails - 80 PLUS Bronze efficiency certified - AC Input: 100-240V,10-5, 50-60Hz - DC Output: 750W (+3.3V & +5V = 170W Max ) Technical Specs: 5.9" Wide X 3.4" Tall X 5.5" Deep One ATX Connector (24 pin) One P4 Connector One 8 Pin CPU Connector (4+4) One 8 Pin ATX/EPS Connector (4+4) Two PCI Express Connectors Two PCI Express Connectors (6+2) Two Molex Connectors Four Sata Connectors Two Floppy Connectors Wattage: 750 Efficiency rating: 80 PLUS Bronze Cooling fan size: 120mm Cable lengths: 22 inches Weight: 4.45 lbs 750 watts Weight: 4.45 LBS. Output Max. Load +5Vsb 3.5A -12V 0.5A +12V1 18A +12V2 18A +12V3 18A +12V4 18A +5V 30A +3.3V 30A

Does it sound like an issue with the psu not providing enough power? By the guy from the co.puter shop mentioned that the motherboard my not be able to provide enough power through the pcie slot
 
Nov 10, 2019
11
0
10
I recently bought a new rx 590 to upgrade from a gtx 960. I used DDU in safe mode to remove my nvidia drivers and let ddu do its thing. After it shut off I switched in the rx 590 and turned the pc on. It booted into windows with no issues and was displaying in 720p. After about 5 minutes, when I was looking for amd drivers, the screen switched from 720 to 1080 and then froze. I reset the pc after the freeze and it wouldn't boot Into windows. It got stuck going into recovery mode. Any ideas what went wrong or how to fix it? I tried 2 different rx 590s multiple times with the same result.
I kinda have the same probleme and i dont think somthing wrong with gpu m thinking its psu