Hi. I had a noisy PC recently. Giving it a tap seem to calm it down (yes, I am a dopey gorilla).
I tapped it too hard and got some digital squeaking noises. It still worked after cutting the power and re-starting, got past the diagnostic screen etc. I cleaned the fans eventually and removed the noisy one. It still worked.
It has been off and on a few times since.
Now, there is power, I can hear the fans.
The mouse is lit up.
The keyboard is not.
I turned the monitor off and on and it is saying 'no signal'
Is there a step-by-step to work things out?
Many thanks, Nick.
(WAS Solved but gone again)
Amazingly, this worked....
I tapped it too hard and got some digital squeaking noises. It still worked after cutting the power and re-starting, got past the diagnostic screen etc. I cleaned the fans eventually and removed the noisy one. It still worked.
It has been off and on a few times since.
Now, there is power, I can hear the fans.
The mouse is lit up.
The keyboard is not.
I turned the monitor off and on and it is saying 'no signal'
Is there a step-by-step to work things out?
Many thanks, Nick.
(WAS Solved but gone again)
Amazingly, this worked....
bionik Jun 24, 2011 02:11PM
Greetings,
Please try again:
Remove your power cord and hold the On button for like 30 seconds to 1 minute and then connect it back and turn on to see if the problem persists.
Good Luck!