windows stuck on boot option menu when starts

[pkardam]

Hi..my windows pc is working fine except sometime it get stuck on boot option menu as u see in pic. . after restart it loads again smoothly plz help and thanx in advance .

 

[Chicano]

1. Reset the BIOS and check results...
http://www.wikihow.com/Reset-Your-BIOS

2. If still the same issue, enable the BIOS quick post (however it's called in your BIOS) it's the setting that hides the motherboard logo... enable quick post to hide the logo, disable to show the logo. This can sometimes solve this type of issues

3. If that still doesn't help, a hard BIOS reset may do it...
a) remove the AC power cable or turn the PSU switch off,
b) remove the BIOS battery from the motherboard,
c) press the power button ahd hold it pressed for a minute...
d) wait 5 to 10 minutes for the BIOS to reset before putting the battery back on.

4. If still having the issue, update/flash the BIOS

5. If nothing yet, try a different PSU


EDIT: Also check the BIOS SATA Controller settings.. try different settings from SATA in AHCI or IDE Mode.

 

[pkardam]

thanx a lot to chicano to give a quick solution i let u know if i solve the issue .

1. Reset the BIOS and check results...
http://www.wikihow.com/Reset-Your-BIOS

2. If still the same issue, enable the BIOS quick post (however it's called in your BIOS) it's the setting that hides the motherboard logo... enable quick post to hide the logo, disable to show the logo. This can sometimes solve this type of issues

3. If that still doesn't help, a hard BIOS reset may do it...
a) remove the AC power cable or turn the PSU switch off,
b) remove the BIOS battery from the motherboard,
c) press the power button ahd hold it pressed for a minute...
d) wait 5 to 10 minutes for the BIOS to reset before putting the battery back on.

4. If still having the issue, update/flash the BIOS

5. If nothing yet, try a different PSU


EDIT: Also check the BIOS SATA Controller settings.. try different settings from SATA in AHCI or IDE Mode.