Yesterday i bought a new CPU cooler(CM hyper 212 evo) for my FX-6350. There was a little throwback when i was installing the cooler but i figured it out. After booting my PC with the new cooler installed i did some stress testing for 2 hours with prime95, Temps were more then great and i thought a 5% oc wouldn't be hard for the CPU to handle.
After restarting and going into BIOS i changed the OC MODE from Manual to cpu OC mode and put the OC to 5%. then i messed with the fan speeds for more silence. I ran prime 95 for another hour but when i opened my ASRock extreme utility center the cpu clock speed was 2625Mhz while prime95 was running. Being the dumbo i am i went to the BIOS again and changed the cpu oc mode to manual. Restarting and opening prime95 again showed that it was at 4.2Mhz which is the default boost clock.
After the testing i played a game for an hour and then when i quit it the blue screen of death popped up.
I went to the BIOS and looked if i had made any accidental changes but everything seemed normal. After quitting the BIOS the screen went black and nothing happened for 5 minutes. This was not normal so i restarted the PC. After restarting I couldn't access Windows anymore. After restarting again the computer reccomended me to go to system repair or something for troubleshooting. The loading bar was moving and in the middle of it, it asked me if i would like to fix the problem with system "save" point.
Being desperate i clicked accept and after the restart i booted into windows but everything froze on my desktop. I waiteed for half an hour but nothing had happened and then i restarted again but this time after pressing the restart button it went to a black screen. Waited on the black screen for 10 minutes and then i held the power button down for 5 seconds for it to shut down. I booted up and windows loaded but the time it took was 3 times slower thatn normal. I opened Google chrome and it opened the last saved pages but none of them wouldn't load and then the blue screen of death came again saying for me to check any recent hardware or software changes. After the blue screen the computer "restarted" and went to a black screen again i shut it down again and then after turning on it sent me to system repair again.
Now i opened my laptop and typed this story. Sorry if it is too long but i am desperate.
Any help is appreciated.
After restarting and going into BIOS i changed the OC MODE from Manual to cpu OC mode and put the OC to 5%. then i messed with the fan speeds for more silence. I ran prime 95 for another hour but when i opened my ASRock extreme utility center the cpu clock speed was 2625Mhz while prime95 was running. Being the dumbo i am i went to the BIOS again and changed the cpu oc mode to manual. Restarting and opening prime95 again showed that it was at 4.2Mhz which is the default boost clock.
After the testing i played a game for an hour and then when i quit it the blue screen of death popped up.
I went to the BIOS and looked if i had made any accidental changes but everything seemed normal. After quitting the BIOS the screen went black and nothing happened for 5 minutes. This was not normal so i restarted the PC. After restarting I couldn't access Windows anymore. After restarting again the computer reccomended me to go to system repair or something for troubleshooting. The loading bar was moving and in the middle of it, it asked me if i would like to fix the problem with system "save" point.
Being desperate i clicked accept and after the restart i booted into windows but everything froze on my desktop. I waiteed for half an hour but nothing had happened and then i restarted again but this time after pressing the restart button it went to a black screen. Waited on the black screen for 10 minutes and then i held the power button down for 5 seconds for it to shut down. I booted up and windows loaded but the time it took was 3 times slower thatn normal. I opened Google chrome and it opened the last saved pages but none of them wouldn't load and then the blue screen of death came again saying for me to check any recent hardware or software changes. After the blue screen the computer "restarted" and went to a black screen again i shut it down again and then after turning on it sent me to system repair again.
Now i opened my laptop and typed this story. Sorry if it is too long but i am desperate.
Any help is appreciated.
Facebook
Twitter
Instagram