[SOLVED] Wires came loose from plastic housing/enclosure how do I fix it?

[Jay879]

I just bought a new pc case and the power button would not work upon further investigation I found 2 small wires that came loose from the plastic enclosure it was connected to. Do I heat the ends up with a soldering iron and jam them back in there or can this not be fixed?

Here are images so you can see what I'm talking about.

https://ibb.co/t2Wnf29

20190819-184713 hosted at ImgBB

Image 20190819-184713 hosted in ImgBB

ibb.co

https://ibb.co/X3m2yBk

 

[NightHawkRMX]

Looks to be a fan controller and not for a power button.

 

[Jay879]

Looks to be a fan controller and not for a power button.

Dang I wonder why it wont power on then I was able to remove the damaged cable I'm at frys electronics and they do not have this type of cable do you know what it's called? Here's another pic of the cable.

https://ibb.co/cx7WW73

https://ibb.co/k3fK1L4

20190819-200622 hosted at ImgBB

Image 20190819-200622 hosted in ImgBB

ibb.co

 

[AllanGH]

Well...the terminals can be soldered onto the wires, but you need to remove the terminals from the connector block before attempting that.

It would actually be better to get a-hold of a couple more of the open barrel terminals, and crimp them on to the wires, then insert the terminals into the connector block.

 

[Karadjgne]

You just bought....

Take it back, swap it out. Those kinds of fan/rgb controllers don't come on cheap cases, so you shouldn't be expected to have to repair something that's brand new and costs that much.