Question Wiring question

gaets

Reputable
Oct 24, 2016
6
0
4,510
0
Hey guys I have a few questions about wiring my new build up. Haven’t done this in a while and I just wanna ask people who know what they are doing not having best luck looking up my issue. Anyway here are my parts list


Computer parts in new build

COUGAR Panzer Evo RGB Black ATX Full Tower RGB LED Gaming Case with Remote

Item#: N82E16817438134 EVGA SuperNOVA 1000 G+, 80 Plus Gold 1000W, Fully Modular, FDB Fan, 10 Year Warranty, Includes Power ON Self Tester, Power Supply 120-GP-1000-X1

Motherboard - https://www.newegg.com/p/N82E16813144297
Processor - https://www.newegg.com/intel-core-i9-10900k-core-i9-10th-gen/p/N82E16819118122
Ram - https://www.newegg.com/g-skill-64gb-288-pin-ddr4-sdram/p/N82E16820374003
Hardrive - https://www.newegg.com/samsung-860-evo-series-2tb/p/N82E16820147671
Graphics card - https://www.newegg.com/msi-geforce-gtx-1060-gtx-1060-gaming-x-6g/p/N82E16814127963


But there are some cables I don’t know how to connect to the motherboard and also there is an additional 6 pin atx connector for my motherboard but my psu doesn’t have an extra one so do I have to connect that or not ima upload some pictures of what cables I’m confused on but if you can help me match it up to this outline of all the connectors on the motherboard
Here are the links to the diagram
https://postimg.cc/gallery/dkTjy8j
https://i.postimg.cc/Pp8QfKTb/82150385-C421-4-ED1-96-E5-FC3586-A14-F54.jpg
https://i.postimg.cc/SnDrgJg9/B73-C2-DFC-BE77-43-E7-AFC2-3-BDA04037-ADF.jpg

Here are the pictures of the connectors I don’t know what to do with

This is one of two wires coming out of back fan it has 3 wires going into it but has 5 pin slots but wires only go to middle 3.. the other wire is already connected to motherboard fan connector but idk where this one goes

https://postimg.cc/gallery/9Hs2vW3

Ok and now these wires are case wires probably for fans but idk where they connect to on the board so if you can help me match these up to the diagram pictures that would be amazing!!!

https://postimg.cc/gallery/QcjDQ1t

Also if you can just lmk about that 6-pin atx connector and if I need it cause I don’t have a cable for it and ima have to get one if I need it but the board is connected with cpu power and the main 24pin connector so not sure if I need it or not.. thanks again for everything guys really really appreciate any help what do ever
 

gaets

Reputable
Oct 24, 2016
6
0
4,510
0
I only have like 4-6 case wires that I can’t find where they plug into and my board has an extra 6pin atx power connector that my power supply doesn’t have a wire for is there anyone who can help please look at my post an help anyway you can I appreciate any insight or help what so ever thank you!
 

Math Geek

Champion
Ambassador
you should start with the mobo manual. start at page 1 and literally go page by page and connect as you go. if you do not have that item on the page then go to the next on. when you get to the end, you are done and all should be right. it will show where all the cables and wires go since it tells about every connection on the board.

if you don't know what the wire from the case is, then look at the case manual as that should tell you what is what. all this info together will ensure you're system is right and ready to go :)

there is no secret formula for doing this, it is simply the principle of RTFM!!
 
Reactions: gaets

gaets

Reputable
Oct 24, 2016
6
0
4,510
0
you should start with the mobo manual. start at page 1 and literally go page by page and connect as you go. if you do not have that item on the page then go to the next on. when you get to the end, you are done and all should be right. it will show where all the cables and wires go since it tells about every connection on the board.

if you don't know what the wire from the case is, then look at the case manual as that should tell you what is what. all this info together will ensure you're system is right and ready to go :)

there is no secret formula for doing this, it is simply the principle of RTFM!!
Ok I will do that and get back to you thanks for the help!!
 

gaets

Reputable
Oct 24, 2016
6
0
4,510
0
you should start with the mobo manual. start at page 1 and literally go page by page and connect as you go. if you do not have that item on the page then go to the next on. when you get to the end, you are done and all should be right. it will show where all the cables and wires go since it tells about every connection on the board.

if you don't know what the wire from the case is, then look at the case manual as that should tell you what is what. all this info together will ensure you're system is right and ready to go :)

there is no secret formula for doing this, it is simply the principle of RTFM!!
Ok so I got everything working besides the case fan LED lights so I think that’s what the wires were for I just can’t find where they go
 

Math Geek

Champion
Ambassador
those should plug into an rgb header. the mobo has plenty of them

  • 1x 4-pin RGB LED connector
  • 2x 3-pin RAINBOW LED connectors
  • 1x 3-pin CORSAIR LED connector
check the manual for where the 4 pin connector is on the mobo. that's what you want to use so you can control them through whatever software is used.
 

ASK THE COMMUNITY