Question WLAN Key

[Ben_Light]

The printed WLAN Key underneath my router is not complete. One digit is missing in the middle. How can I retrieve the complete WLAN Key?

A quick response will be highly appreciated.

 

[USAFRet]

Is this router from your ISP?
If so, ask them.

 

[Ben_Light]

Is this router from your ISP?
If so, ask them.

Thanks for your response.
No, I bought it from the market. Any solution in that case?

 

[USAFRet]

Thanks for your response.
No, I bought it from the market. Any solution in that case?

"the market".....?

Look up the user manual.
It should tell you how to reset it back to factory specs.
And it should tell you what the default key is.

 

[faalin]

well there's only some many numbers and letters it could be. Just start plugging them in till it works.

 

[Ben_Light]

"the market".....?

Look up the user manual.
It should tell you how to reset it back to factory specs.
And it should tell you what the default key is.

No manual available. The brand is Huawei.

 

[USAFRet]

No manual available. The brand is Huawei.

Model number?

 

[Ben_Light]

Model number?

EchoLife HG8245W5

 

[USAFRet]

EchoLife HG8245W5

EchoLife HG8245W5-6T Quick Start for QR code 05

support.huawei.com

Reset it back to factory defaults:
"Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT."


Log into it with a wired connection.
Set the password to what you want.

 

[Ben_Light]

EchoLife HG8245W5-6T Quick Start for QR code 05

support.huawei.com

Reset it back to factory defaults:
"Press Reset by using a needle-type object for longer than 10s to restore factory defaults and reset the Huawei ONT."


Log into it with a wired connection.
Set the password to what you want.

The Serial # is without "6T". Received the "Unable to connect" error on following the above listed steps.

 

[JohnMGotts]

The IP address, username and password should be on the label.
Connect via inputing the IP address in via “Connect”on a wireless network or
via a direct ethernet connection from your PC and inputting the IP address found
on the router label.
If you’re missing part of the password, just substitute the missing character one at a time. Normally user names and password defaults are admin/admin or admin/password.

 

[bill001g]

Is there not a userid and password printed on the bottom of the router. You should be able to use that but you will have to use a ethernet cable.

A lot of huawei also use

root, admin and telecomadmin/ admintelecom

The second ones some people say is a backdoor the ISP uses but it is unclear if that information is true but huawei products have a very long history of have insecure backdoor methods of accessing them.