[SOLVED] XFX nForce 730i post code D3/EP

[NoahIsBroken]

I know this motherboard is well over 10 years old now, but I found an old system with this motherboard in it and when I power it up there is a long beep and the post code D3 or EP is shown (depending on what direction you look at it from) and there is no output from DVI, HDMI or VGA. I haven't been able to find a thread about this specific problem and the manual does not have D3 or EP listed, so I thought I might as well ask.

 

[NightHawkRMX]

Reseat CPU and check for bent pins. Reseat ram and GPU as well.

Board could just be faulty.

 

[NoahIsBroken]

Reseat CPU and check for bent pins. Reseat ram and GPU as well.

Board could just be faulty.

I'm using the onboard graphics but I'll try the other two.

 

[NoahIsBroken]

Reseat CPU and check for bent pins. Reseat ram and GPU as well.

Board could just be faulty.

I think it worked! Thanks a lot!