[SOLVED] XMP not working

Toggle sidebar Toggle sidebar
Yahia Mohamed

Yahia Mohamed

Commendable
May 7, 2020
13
0
1,520
Just built my new PC the main specs to know are:
Corsair vengeance rgb pro DDR5 2X16 CL3 with SKU: CMH32GXM2B5600C36
ROG STRIX B660-A motherboard link: https://rog.asus.com/motherboards/rog-strix/rog-strix-b660-a-gaming-wifi-model/
and an I7-13700k
My problem is that when choosing XMP 1 or XMP 2, my PC does not post. I now know that my motherboard isn't compatible with my memory kit, but is there some sort of way to make a custom overclock so that the memory kit can reach 5600 Mhz?
I also literally know nothing about ram overclocking
 
Last edited by a moderator:
Yahia Mohamed said:
Just built my new PC the main specs to know are:
Corsair vengeance rgb pro DDR5 2X16 CL3 with SKU: CMH32GXM2B5600C36
ROG STRIX B660-A motherboard link: https://rog.asus.com/motherboards/rog-strix/rog-strix-b660-a-gaming-wifi-model/
and an I7-13700k
My problem is that when choosing XMP 1 or XMP 2, my PC does not post. I now know that my motherboard isn't compatible with my memory kit, but is there some sort of way to make a custom overclock so that the memory kit can reach 5600 Mhz?
I also literally know nothing about ram overclocking
Click to expand...
Make sure you have the ram in the proper slots.

Get the latest bios.
 
I managed to reach a solution. I enabled XMP but instead of letting the memory run at 1.25V, I used 1.2 and the computer posted normally. Currently seeing the how much further I can go.
(EDIT) I couldn't reach anything higher than 1.2 not even 1.205. Stress tested the memory for a bit and everything was alright!
 
Last edited:
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom