Yo you lot of amazing people who can solve this ?

[Murtagh00]

my rig

2500k i5 5 years old
ssd sandisk 240gb year old
780gtx year old
h50 watercooling 5 years old
psu is like a 850 corsair about 5 years old
mobo is like a biostar a year old
hyperx 16gb about a year old

2 days ago my system has been running like a slug. its so slow. loading a google page loading windows edge accessing external hard drive.

everything. i uninstalled loads of programs i have 60gb free on ssd no non wanted background programs running. no viruses

i have fibre 50gb

I have used c cleaner i have ran memtest up to pass 10% no errors ( will run longer )

any suggestions? gpu is up to date recently cleaned the system to see if that was the problem still the same.

I am baffled as to what it could be normally i have 50 webpages open autocad photoshop and indesign and was fine now i cant even get a webpage without taking longer than 5 minutes.

 

[Murtagh00]

right guy i went to maplins and managed to pick up a cool master 120 lite for 38 pounds. now i have set up the fans like this

 

[Murtagh00]

i have the extension cable plugged into the cpu fan socket and the watercooling into something else then the rest of the fans are connected on the extension in the back of the case

 

[The Paladin]

and now it tests ????

 

[Murtagh00]

and now it tests ????

I was asking for the best set up with fans as everyone say my fan we're running slow?

 

[Murtagh00]

and now it tests ????

maybe i got the cabling wrong master socket con extension cable into cpu fan socket ? thats what instructions say


see here so the single one should go in the cpu 4 pin fan socket?

 

[Murtagh00]

do i need to do something like this ? https://i.ebayimg.com/images/g/pjYAAOSwSclXLV95/s-l1600.jpg

the one that connects to the mobo does that go to the cpu fan or to the other one i have i have 2 fan header one is cpu fan the other is a 4 pin. ? the water cooler is a 4 pin so i thought at should go in the 4 pin on the mobo and the molex connect to the cpu fan header?

 

[Murtagh00]

Its bad news guys !! the computer is still running slow so slow that it wont function only enough time for me to load hwmonitor

 

[Murtagh00]

 

[Murtagh00]

mentest came back with no errors has it running all night

 

[The Paladin]

1. I have never seen a AIO pump contain a 6 wire kit for fans, so I am not sure what your looking at to be honest and all the details from Cooler Master 120 lite is 1 wire for AIO pump to be connected to CPU_FAN header

2 what make and model is your motherboard (seriously Biostar one year old isn't helpful information)

3. when I look at your image it seems your AIO Pump power wire is going to the power supply, and this confuses me.

 

[Murtagh00]

1. I have never seen a AIO pump contain a 6 wire kit for fans, so I am not sure what your looking at to be honest and all the details from Cooler Master 120 lite is 1 wire for AIO pump to be connected to CPU_FAN header

2 what make and model is your motherboard (seriously Biostar one year old isn't helpful information)

3. when I look at your image it seems your AIO Pump power wire is going to the power supply, and this confuses me.

biostar h61mlv3

 

[Murtagh00]

1. I have never seen a AIO pump contain a 6 wire kit for fans, so I am not sure what your looking at to be honest and all the details from Cooler Master 120 lite is 1 wire for AIO pump to be connected to CPU_FAN header

2 what make and model is your motherboard (seriously Biostar one year old isn't helpful information)

3. when I look at your image it seems your AIO Pump power wire is going to the power supply, and this confuses me.

http://

 

[Murtagh00]

here is the set up

 

[Murtagh00]

1. I have never seen a AIO pump contain a 6 wire kit for fans, so I am not sure what your looking at to be honest and all the details from Cooler Master 120 lite is 1 wire for AIO pump to be connected to CPU_FAN header

2 what make and model is your motherboard (seriously Biostar one year old isn't helpful information)

3. when I look at your image it seems your AIO Pump power wire is going to the power supply, and this confuses me.

the mobo only has 2 fan headers 1 for cpu 3 pin one 4 pin I have 5 fans in total on the case and 1 aio pump

 

[The Paladin]

okay....

regarding Fan Headers;

your motherboard has only 1 Fan header and 1 cpu fan header (show below)
Your AIO needs to be on the CPU_FAN1 header, which leaves you 2 Radiator fans, and 3 case fans for 1 header
this is not a good setup, you cannot simply split the signal the motherboard will not work normally.
you will need a fan controller added to handle your fans. I don't care what that diagram tells you.
Something like this (this particular model can control 6 fans: https://www.newegg.com/Product/Product.aspx?Item=N82E16811997113

Also, did you use thermal paste between cpu and heatsink ?

 

[Murtagh00]

okay....

regarding Fan Headers;

your motherboard has only 1 Fan header and 1 cpu fan header (show below)
Your AIO needs to be on the CPU_FAN1 header, which leaves you 2 Radiator fans, and 3 case fans for 1 header
this is not a good setup, you cannot simply split the signal the motherboard will not work normally.
you will need a fan controller added to handle your fans. I don't care what that diagram tells you.
Something like this (this particular model can control 6 fans: https://www.newegg.com/Product/Product.aspx?Item=N82E16811997113

Also, did you use thermal paste between cpu and heatsink ?

yas i used nano diamond thermal compound by jetart

yeah i think i need a fan controller

 

[Murtagh00]

okay....

regarding Fan Headers;

your motherboard has only 1 Fan header and 1 cpu fan header (show below)
Your AIO needs to be on the CPU_FAN1 header, which leaves you 2 Radiator fans, and 3 case fans for 1 header
this is not a good setup, you cannot simply split the signal the motherboard will not work normally.
you will need a fan controller added to handle your fans. I don't care what that diagram tells you.
Something like this (this particular model can control 6 fans: https://www.newegg.com/Product/Product.aspx?Item=N82E16811997113

Also, did you use thermal paste between cpu and heatsink ?

will this be okay? it only has 4 6 pin fan connectors though i think i have 4 fan that are 3 pin

 

[The Paladin]

the controller I suggested has 6 x 3-pin connectors to fan. Besides you can run a 3 pin fan with a 4 pin controller cable

 

[Murtagh00]

the controller I suggested has 6 x 3-pin connectors to fan. Besides you can run a 3 pin fan with a 4 pin controller cable

Yeah but i can literally just drive to the shop that has one in stock now

on another note the computer loads but as soon as i load hw monitor it freezes up .

 

[Murtagh00]

the controller I suggested has 6 x 3-pin connectors to fan. Besides you can run a 3 pin fan with a 4 pin controller cable

i am typing from the computer.

I think it was the old version of hw monitor that was the problem as it was on my external hard drive and loaded from that. not installed on the computer.

 

[The Paladin]

well done.