ZOO KEEPER WIRE HARNESS NEEDED!

[David]

Archived from groups: rec.games.video.arcade.collecting (More info?)

I AM LOOKING FOR A ZOO KEEPER WIRING HARNESS TO GET MY ZOO KEEPER UP
AND RUNNING AGAIN. ANY HELP WOULD BE GREATLY APPRECIATED!

THANKS
DAVID

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

what happened to your old one?? it ran without a harness? 😉

jon
http://www.arcade-classics.com


"DAVID" <DMFJR@AOL.COM> wrote in message
news:1119655608.099962.79460@o13g2000cwo.googlegroups.com...
>I AM LOOKING FOR A ZOO KEEPER WIRING HARNESS TO GET MY ZOO KEEPER UP
> AND RUNNING AGAIN. ANY HELP WOULD BE GREATLY APPRECIATED!
>
> THANKS
> DAVID
>

 

[David]

Archived from groups: rec.games.video.arcade.collecting (More info?)

HEY JON,
NO IT DOES HAVE A HARNESS I CANT FIND ANYTHING ELSE WRONG WITH IT. IT
HAS ALWAYS BEEN A PAIN. BOARD SET IS FINE. P/S IS FINE. IT USE TO BE
EVERYTIME I MOVED IT AROUND IT WOULD DO THIS, BUT FOR SOME REASON I CANT
GET IT TO WORK NOW. ITS A SAD STORY THATS STARTING TO AGGRIVATE ME. 8o|
DO YOU HAVE ANY OTHER IDEAS.

THANKS
DAVID

--
Sent via Gamer Newsgroups
http://www.gamernewsgroups.com

 

[Prok]

Archived from groups: rec.games.video.arcade.collecting (More info?)

First thing i'd do is pull all the pins out of the connectors on the
interboard harnesses (not the ribbons).. clean and adjust all those
contacts in there as they tend to bend closed too far and not make contact.

/b

http://www.tutankham.com

"DAVID" <DMFJR@AOL.COM> wrote in message
news:Hw3ve.113$_r5.25818@news.uswest.net...
> HEY JON,
> NO IT DOES HAVE A HARNESS I CANT FIND ANYTHING ELSE WRONG WITH IT. IT
> HAS ALWAYS BEEN A PAIN. BOARD SET IS FINE. P/S IS FINE. IT USE TO BE
> EVERYTIME I MOVED IT AROUND IT WOULD DO THIS, BUT FOR SOME REASON I CANT
> GET IT TO WORK NOW. ITS A SAD STORY THATS STARTING TO AGGRIVATE ME. 8o|
> DO YOU HAVE ANY OTHER IDEAS.
>
> THANKS
> DAVID
>
> --
> Sent via Gamer Newsgroups
> http://www.gamernewsgroups.com

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

I agree. If it stops working because it gets moved, it sounds like it
should be a wiring issue. Just check continuity from connector to
connector and from board to board for each wire. You should narrow it
down.

 

[David]

Archived from groups: rec.games.video.arcade.collecting (More info?)

I get nothing on the screen most of the time. Sometimes I will get
some red color on the screen. I will go through it again today since
its supposed to rain all day. Any other ideas are greatly appreciated.


Thanks
David
www.charlestongamerooms.com
(only been working on it for 3 weeks so its not fancy but it does have
my gameroom pics on page two)

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Check for bad solder joints on the pins.

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Sounds a bit drastic what prok is saying since we dont know (yet) if thats
even the issue - no sense in doing all that work for nothing. I would say
check the connections and the ribbon cables with your meter and make sure
they are making contact. I have a question for you, when you turn on the
game what does it do? what do you see on the screen?

jon
http://www.arcade-classics.com