Search results

should hve done a backup. i am looking for app side to recover my files. any app recommendation?

I have SSDs and HDDs full of images and videos. In the heat of the moment, I swiftly deleted it. So, I am looking to recover the data from the external drive. I found so many data recovery apps for trial; some scanned the files, some didn't, but I can't recover them because of the trail...

Updates The CMOS batt was the fault, and I installed a new CMOS batt, and now it works. Problem solved. Before changing CMOS, I noticed that with the old CMOS, my bios time and date were wrong. DaleH, you were right. Anyway, thanks for everyone's input.

date and time are correct. SIDE RANT 1-does BIOS date and time updates windows date and time when we are in windows? 2-is there a option to have a different date and time on BIOS and windows 3-when you mentioned incorrect date and time did you mean in windows or...

so meaning just buy a new CR2032 place it on mobo while system is completely off and just turn it on? sorry i am very new to CMOS kind of things.

i9-9900k trident-z-32gb ROB Strix-Z390-E gaming zotac1080ti mini corsair-RM1000X-1000W

Hi, When turning on my PC, it suddenly turns off and then turns on automatically for a little longer than the first time, turns back off, then turns on again and shows American megatrends. My option now is to press F1, which takes me to bios. I have already setup my boot device, so I just...

I am planning to use Chase Fan with my GPU, and surprisingly, I didn't know about the differences between the normal 4-pin header and the 4-pin header on the GPU board. Actually, when booting, my GPU does not show any display until I connect my GPU fan to my GPU fan header and my mobo lights...

This question has been asked many times, so bear with me. So, I have already come across the video with the heat gun. The big question is: can I put thermal pads (Thermal Grizzly Minus Pad 1.5mm) on them and put the same trident heat sink back? Does it have any advantage over performance and...

Hi, sure this is not right. I was just changing thermal pads and my I/O shield seem like this now. I tried pushing it back in but its to tight and it doesn't stay or lock in place, hell with it if it fits in my case it's fine but it feels like it doesn't. So any help is appreciated. Thanks...

the gpu idles at 30c and cpu at 33c, 360 rad cools the cpu so its not a fair comparison. Max gpu at maybe 55 to 60c maybe be more in gaming, depends on the workload. This is the first time i am changing thermal pads. If possible to add better cooling!!!

Applying thermal pads to the v-ram and mosfet on the front is normal, but can I also put them on the back of the v-ram and mosfet? Instead of a backplate, can I put a heat sink (the same size or a little bigger than the front heat sink) that covers all the thermal pads? 92 mm, 1500 rpm fan...

i hve corsair ML 140x2 which can go up to 1200rpm and cooler master 200mmx2 speed up to 700rpm. mostly people go for higher rpm or play with rpm speed for all the fan setup so the Q is when u said 200 will move a lot of air then what about the speed shortage? and even if i stack 200 and 140 will...

stacking fan-with-fan, this is the configuration will it work for cooling?

As the heading says, I am still in Pascal gen. Let me start with the rig. I have a 9900K along with a Zotac 1080TI mini. In the near future, I may purchase a 4090ti or XTX 7900 with the 7950X Ryzen.So, Option 1: Water cooling I have a Kraken G12 already. I'm thinking about getting a Deepcool...

hi guys this is for everyone sorry for wasting your time it was totally my mistake on both boot and graphic card problem in boot i forgot to connect sata power and in graphic card led lights and fan plugs where not seated properly on there headers ... .... yah i did that ......... i swear...

Thank you for responding i did air compressor to my rada, just wanted to clean it thuroughly water can go places that air even compressed air could not anyway i saw so many vids where the gamers put thier rad in ice bucket for benchmark so i was wondering anyway thanks

Thanks for responding will check but even if its the boot problem my graphic card fans and brand logo doesn't work but there is this warm hot feel on my back plate why is that i guess when i solve the boot problem and get into windows we can make decision on whats happening anyway will check...

Thanks for responding it just takes me to bios fan control where everthing in fan is dectected and running as it should but it doesnt say anything on boot or any disturbing problem message either so from there i just save and exit that should normaly start and boot up the system but mine...

Thanks for responding i have cheacked double cheacked both ways mobo and 1080ti from both i do get display but it goes to bios not to windows with the same state like i mentioned before for my 1080ti dead body

Thanks for responding driver update ya i havent done it and swapping my 1080ti in another system i will and vice versa from others system to mine well check and let you know but dont u think that even if the driver is not updated the graphic card should show sign of life through running fans...

Thanks for responding well try

thank you for responding corsair RM 1000x the whole computer is 6 month old and its assembled not branded like alienware or somewhat everything is brand new no second hands

thank you for responding spec 9900k 1080ti asus strix z390 e trident 8 x2 ssd seagate barracuda win 10 pro thermal arctic mx 4 about onboard graphic there is this new problem where even if i use onboard graphic or my 1080ti when i start my...

hi, i bought 1080ti card 6 months ago not gaming just 3d work temps where normal like around 36 to 38 nothing alarming and the whole computer was getting dusted so i ripped apart everything including 1080ti to clean and change thermal paste. Now when i put them back the 1080ti is not working no...

Hi, i am fairly new to rads so, i have read all the ways of cleaing rads from air compresser or vacuum or blower i was wondering whether i can clean it by putting the rad in a bucket filled with water and with some flow of water through the rads finn i dont knw just a thought thank you

Thank u u for ans i think i will go for core as it has little limitation than xeon nd i will be using little bit of everything, which do u think is best in core i7 for gaming, 3D and rendering

Hi i am really confused about selecting between these CPU XEON - E5-2697 v3 or CORE i7 - 5960x and with them i will be teaming up with 980Ti x2 Primary activities_ 3D programs, serious Gaming and Rendering Common activities_ editing, multimedia (movies) and basic computing so which one should i...

thanks, i think i would go for MSI X99s

Hi correct me if i am wrong as i am new here i am going to buy x99 platform motherboard but i dont knw which motherboard to buy i mainly focused in games and 3d applications. i hve seen asus rog ext 5 but lot of compromise and seen msi but so many people negative reviews of msi motherboard lit...