Recent content by 2spooky

Yeah, well , I'm not willing to trade any more of my core clock frequency for lower power consumption. I'm just going to live with it at 1800mhz and 825mv with whatever it consumes. If I go lower than 825mv then in some games crashes.

I made another clip where I tested the following: https://jumpshare.com/share/f5zT4GiyOciKnz4vizxh Stock profile but 75% power , as you can see in the clip: voltage between 800mv-825mv core clock is between 1500-1600mhz power between 270-280W Stock profile voltage between 893mv-912mv core...

Ok I flashed 2 bioses for testing. 1st one flashed was gigabyte eagle with 350W target and 370W limit 2nd one flashed was asus strix oc with 390W target and 450W limit my original bios is gigabyte gaming oc with 370W target and same limit I went back to the original bios, with the eagle...

I did limit the card to 80% of power and my core clock went to like 1600mhz ... and I double checked the vbios version and it matches up exactly what it says in gpuZ. This is the bios it has from the factory. https://www.techpowerup.com/vgabios/242722/gigabyte-rtx3080-12288-211123 However I...

I made a short clip after a few minutes of playing, it seems here in the safe zone consumes the most power, when I go outside it goes down to around 310W , but even after a few hours of playing , it maxes out at around 345W , I don't know why and how , since it's undervolted to 825mv... clip of...

Hello fellers, I have an RTX 3080 12GB version and after many tests, I found a stable uv+oc profile with msi afterburner. The profile is 825mv with 1815mhz coreclock and +800mhz to memory clock. No crashes , no weird artefacts etc I've learned how to undervolt from this youtube clip...

Yeah , after many hours of reading the forums I finally gave up , not worth the hassle just for a bit of undervolting. Thanks for the valuable info, I honestly didn't know that over time the silicon degrades and can mess up the stats of the card.

Hello , I'm not a miner neither I wanna be. I just want some help with moding a bit the default bios of my rx 570. Ok so the default bios is this https://www.techpowerup.com/vgabios/192057/xfx-rx570-4096-170419 I want to mod the core clock frequency from default to my clocks/volts. From this...

I'll leave it like this , I managed to hit 15.5gb of ram usage without anything acting weird, crashing or lagging. I still have 186gb free space on my hdd so it's fine.

I read somewhere that it's recommended to put a fixed paging file also the same amount on minim and maxim. Like the amount of ram you have you multiply by 1.5. In my case it's 1024 x 16 = 16384 // 16384 x 1.5 = 24576 I've put 24576 as min and max paging file but this time on my HDD , no on my...

Recently I upgraded to 16gb(2x8) ddr3 1600mhz after a looong time using 2x4(8gb). I finally thought I could disable paging file so I did ,before when I had 8gb of ram I've put paging file on my ssd. Now with the 16gb of ram I disabled paging file but when I hit around 10gb of ram usage my system...

Yes, I activated fan tuning but I want the fan to turn on when gpu hits 60C and stay at 46% until it hits 85C then stay at 50%. I can't do that in amd adrenalin , but I'm happy I can still use the msi fan curve without anything bugging out between these two softwares.

I found a solution after all , I will use amd adrenalin soft to apply my oc profiles(without enabling fan control) and I'll use msi afterburner strictly to apply only the custom fan curve, now my profiles and voltages apply as it should and I'm also happy that I can still use my constant fan...

After many hours and days of testing in games and benchmarks , I finally found the sweet spot on oc and undervolting my rx 570. I use msi afterburner and I have 2 profiles for different type of games. profile 1= 1290mhz core clock / 1800mhz memory clock / 1000mv profile 2= 1380mhz core clock /...

I was thinking about that too , will have to get an input cable from somewhere , I'll see and come back with an update. update: I've been to a few nearby audio shops and they suspect a partial faulty transformer. I won't buy another transformer though because it's more than half the price of...