Recent content by Adam Jelinek

So now that the game has came out, I'm not really sure what I should do. I really wanna play the game but don't want to risk killing my 3090. I'm not even sure if my exact card had any bricking issues with the beta like the EVGA 3090 FTW3's did. What are your thoughts?

Hi guys so the 3090 is a very hot running card and it definitely makes my room quite toasty. I’ve been reading ever since the launch of these cards with instability and such issues about undervolting the cards. I’m not quite sure how to do this, or even what numbers I should undervolt to. Mainly...

So I have a ryzen 7 5800x, msi b550 tomahawk, and msi rtx 3090 suprim and I've been having weird instances where I'm just using my pc, and then the sound when you plug in a usb device goes off randomly. And obviously I'm not plugging in or unplugging a usb device as that happens. I did update my...

Hi so my pc won’t boot after I messed with the ram and cpu overclock at the same time. It’s hard to reach the 2 pins with a screwdriver since the 3090 is so thick. Can I put the screwdriver to the 2 pins without my gpu installed? Also does my psu have to be off and unplugged, or on and plugged...

Hi so my pc won’t boot after I messed with the ram and cpu overclock at the same time. It’s hard to reach the 2 pins with a screwdriver since the 3090 is so thick. Can I put the screwdriver to the 2 pins without my gpu installed? Also does my psu have to be off and unplugged, or on and plugged...

I don't have the latest bios as I only flashed the bios when I built my system to use the ryzen 7 5800x in my mobo. But I will try that and hopefully it works, thank you.

Hi guys so this isn't like a huge issue or anything but I was wondering about usb connectivity issues. So the Msi tomahawk mobo has around 4 usb ports, kinda low amount, but I have my mouse, keyboard, and my o11 dynamic also uses some sort of device for controlling the integrated rgb of the...

Ah I see. I might try that config out. Thank you

So what kind of a static fan curve would you think is best? Like percentage wise

Honestly I have an o11 dynamic with 9 fans so noise doesn't bother me at all haha. I mainly ask because I don't want to A cause the fans to wear faster, and B overheat my card or cause any heat stress.

So I've been wondering for a while and looked up different stuff but I'd really appreciate hearing from you fellow folks. I set a custom fan curve in msi afterburner to basically match the fan speed of my gpu to the temp its at, so its basically like when its at 60c the fans are at 60%. And if I...

Well I did test it at the same part of the game where the frames would drop and I gotta say it is better. It used to drop down to like 40 or something like that, now it stays at around 70-80 so thank you

so heres the benchmark after I set cl to 16 the other 3 values to 20, and the last value to 40. https://www.userbenchmark.com/UserRun/39812363

Okay so if I was to change to cas latency to 16, would I need to change any other numbers as well? I just know that there are a lot of different numbers and such with ram

Usually cpu is around 30-50% and gpu is usually upper 80s to mid to high 90s