Recent content by AdamShep

  1. A

    Query regarding 2kro - CM devastator

    Hi, need some info on a purchase. I intend purchasing the cooler master devastator(keyboard+mouse), hwevr d keyboard is a 2KRO, so wld dat b an issue while gaming? Under wat circumstances would it be? and what type of games would be affected?
  2. A

    Which laptop should I go for(gaming)?

    Lenovo Z50-70 Notebook http://www.flipkart.com/lenovo-z50-70-notebook-4th-gen-ci5-8gb-1tb-win8-1-4gb-graph-59-427802/p/itmdy3y7rgpa75mg?pid=COMDY3Y2NUV7FGQH&otracker=from-search&srno=t_3&query=z50-70&ref=beefb182-c324-4137-9a71-a24ae4c3a22d Or HP 15-P073TX Notebook...
  3. A

    Best gaming laptop under 55,000 INR

    Hi team, I intend purchasing a gaming laptop under 55,000 INR. Currently the best I have stumbled upon is - Lenovo Z50-70 Notebook (4th Gen Ci5/ 8GB/ 1TB/ Win8.1/ 4GB Graph) (59-427802) Link -...
  4. A

    Is my new hardware rig compatible?

    Hello, what do you guys think of the config below? are all the products compatible, is the power supply sufficient? Gigabyte ga-h77n-wifi i3 3220 3.3 GHz G.Skill RipjawsX DDR3 4 GB (1 x 4 GB) PC RAM (F3-10666CL9S-4GBXL) Corsair VS350 350 Watt PSU Currently wouldnt be getting a dedicated...
  5. A

    CPU clock too high @ 9505.5 MHz

    Now something weird again, i am yet getting weird readings, at times 8 GHz or 11 GHz, but if on every boot i load the optimized default values at BIOS the max i get is 3791 MHz which is in tandem with my processor =/ my temps are all normal even with 11 GHz reading the temp maxed at 42 Degree C.
  6. A

    CPU clock too high @ 9505.5 MHz

  7. A

    CPU clock too high @ 9505.5 MHz

  8. A

    CPU clock too high @ 9505.5 MHz

    Hello guys, yesterday while playing need for speed most wanted 2012, my cpu clock speed touched 9505.5 MHz, is it even possible? Would it damage my processor? I got the reading using hwinfo64 My rig: Processor: i5 3570 3.4 - 3.8 GHz Motherboard: gigabyte ga-h77m-d3h RAM: gskill ripjawsX 8 GB...
  9. A

    Cannot setup stereoscopic 3d via nvidia control panel

    Hello, as the topic name suggest's, while setting up stereoscopic 3d via nvidia's control panel, i get the following error "Not optimum mode: recommended mode 1360 X 768" I have a samsung syncmaster 933, with a resolution of 1360 X 768 which currently is my windows resolution, so any tips on...
  10. A

    New graphic card, compatibility: Sapphire Radeon HD 6670

    Hello everyone, this is my current rig: Processor: i5 760 MotherBoard: Intel DH55TC RAM: Transcend 6 GB (3 X 2 GB) HDD: 1 TB Caviar Green SMPS: VIP 400W Gold Graphic Card: nvidia 9400 GT I intend replacing my old nvidia with a card that retails around 5000 Rs/-. So my options are nvidia 640 or...
  11. A

    Underclock i5 3570 using Easy tune 6

    Hello guys, i have an i5 3570 mounted on a gigabyte ga-h77m-d3h, since the processor is locked, i can't change the multiplier which is 16, but i guess i can change the BCLK which is 100 MHz. Easy tune 6 has the option for it, so would it impact my processor if i change the bclk, anything else...