Recent content by ahmedzeex

ive done further trouble shooting Reset CMOS Battery then load optimized values +>>>> Windows Load okay and when i restart it boot normally without BSOD or NO POST Using XMP profile >>>>>>>> BSOD and windows keep crashing Disable XMP and set Dram speed manually @ 3100 MHZ >>>>> widows...

2 separated Kits but been working on my older PC for like 2 years now my old mb was z390 aorus master is it possible to cause instability on asus and work fine on gigabyte ???!!!

tried new OS several times , updated bios 2 times still nothing im traveling right now the technical support asked me to remove cmos battery i will try when i get back but can OS cause post failure ??

Hello guys, I've just upgraded my setup with intel 12700k , ASUS rog z690-a D4 mother board since day one im facing problems random BSOD i searched google people say its problem with XMP profile i updated my bios several time with bios update on asus website still same problem I disabled...

tried all solution doesnt work , installed new windows now system work fine but lost the data tho

will try as soon as i get back from work ty

will try as soon as i get back from work ty

Hello guys I have samsung evo 970 m. 2 drive I addition to 2x 2b sshd firecuda Every thing was fine and working perfectly One of my sshds health was very low and i replaced it with newer one After removing dead sshd and connecting new sshd system suddenly not booting even when i connected...

update #2 : updated the bios to latest version still nothing unable to boot with other drives connected or with m.2 only connected

it boot when i connect sata drive with windows installed on it ( i have old ssd with win 8.1 installed on it when i connect that one the system boot without any problem) when i use the m.2 with other SSHD only the boot menu keep redirecting me to bios page

It's not completely dead its 4% health but i don't know what is wrong is there anyway to fix this without formatting the m. 2

i put the old HDD back and still can't boot from m.2

note : all my partitions are MBR i dont know if that is a problem but it was all working fine for the past 2 years this is sudden problem i used old SSD the m.2 still visible under windows with all data on it but still can't boot from it no matter what

Hello guys I have samsung evo 970 m. 2 drive I addition to 2x 2b sshd firecuda Every thing was fine and working perfectly One of my sshds died and i replaced it with newer one After removing dead sshd and connecting new sshd sys not booting Keep redirecting me to bios over and over...

ty guys for your help i got 2k va panel 144hz monitor and i'm liking it so much better than tn panel