Recent content by apexbeats

Just popped the case open and I could fit one of the krakens AER fans on the top of the radiator on the inside of the case(graphics card side). So the 2 QL’s on the outside of the radiator (front of case side) and one Aer on the other side. Would that help?

Hey guys! I recently helped build a rig for my buddy with all the parts he wanted. I advised against running the corsair QL 140s as radiator fans on the kraken x63 but he insisted. Current setup is as follows: Back: QL120 Exhaust Top: 2 QL120 Exhaust Front: 2 QL140 Intake (right side of...

https://postimg.cc/Tyf6M5zb Hey again, here’s the setup we ended with. Let me know what you think about this setup. I know these QL fans suck as rad fans but he insisted so here we are. I’m curious if it would hurt temps if i flipped the PSU around. It’s rgb and he wants all the RGB he can get...

Gotcha. I would suppose a pull may be a bit quieter than a push even though it’s mesh?

Is having the radiator fans against the gpu “pulling” generally better for temps than having the fans up against the front of the case “pushing” air into the case? Or is it really just minor temp differences and preference?

Flip the fans? I was thinking of flipping the radiator to look like this with the fans at the front of the case, not up against the GPU (and have them drawing air into the case, through the radiator fins, towards the GPU/CPU/etc). As for the top fans you may be correct, I would have to look...

Meshify C & Kraken X63 Fan Setup Hey all! So my friend just built his first PC on his own and asked me to take a look at it. I’ve built a couple before and am no expert but his fan setup he swears by has me confused. He is running the X63 kraken as an exhaust out the front Rear 120mm as an...