Recent content by Axle_V

My motherboard is labeled pwr1 for the 8pin and pwr2 for the 4 pin.So I'm safe I guess? Thanks for your help.

By extreme OC you mean those with liquid nitrogen? Also it's safe to OC my CPU to 3.9 or 4.0 GHz ? I intend to use AIO liquid cooling in near future.

Hello I have the following specs MSI b450 gaming pro carbon ac Ryzen 5 2600 Rx 580 Seasonic focus plus 550 platinum When I hook up the whole system I was stuck with the PSU / motherboard connectors. My PSU has 4+4 pin connector for CPU but my motherboard has 8+4.What can I do in these cases...

Actually Corsair rmx 650g80 has the same price with seasonic 650g80 in my country at 97 € both.I will go with the new rmx series and test another time in the future the seasonic series.Thanks for your help!

I plan to clock the CPU to 3.8 or 3.9 GHz, the GPU a bit more and the ram as far as I can because as far as I know ryzen work better with fast ram clocks.Also I don't plan to put fanless psu because I'm too scared for some reason when it depends on psu.Im afraid that it will burn my whole house...

I'm planning to go with ryzen build. So far I bought all the pieces except psu.Im planning to overclock the whole kit. Specs: Case: Phanteks p350x Motherboard: MSI B450 carbon ac CPU: ryzen 5 2600 RAM: x2 8gb g.skill 3200mhz (the rgb ones) GPU: gigabyte gtx 1060 g1g 6gb SSD : Samsung 960 m.2...

I pushed it over 870 mhz and full mem and still it dosent fail and its stable in framerate and also temps. My question is with 90W power brick how much can I still overclock it?

I have a old laptop and I want to get the most of it (basically test) I have a 90w powersupply (brick) and I have overclocked a GT540m 2gb from 670 mhz and 900 mem to 770 and 1050 mem and I want to ask.Its possible to overclock it even more.I want to have a decent gaming e-sport and some...

Nevermind it. I solved it I changed the minimun and maximun CPU power managment to 99% (both) and everything is back to normal 60C idle but I also have a crappy thermal paste but I will get MX5 or try liquid metal. also tried CORE TEMP v1.11 and there is recorded 52 C and on Speccy 60C tried to...

Doctor Rob.I'm actually afraid to apply liquid metal on a laptop because you know.Both metal both liquid I can't try unless someone else has done the test and worked for month and more.

I already have mutlicore x6 and I have removed the plastic cover for cooling solution and I had about 70 C in full load with i5-2410m. After I inserted the i7-2630qm everything turned upside down.Both cpus are running at 70C idle right now.the only thing I can say is that the sensors are not...

sorry for late response turn's out that the PSU is fried.It has a voltage or something switches for EU/US input or output I could say I had switched it at 115 from 235 and it fried.All the other parts were not affected I removed the PSU as quick as possible and the system is running fine with a...

Greetings, I recently bought a second hand CPU and two new cpu fan for my laptop and I have a huge thermal problem i did both test different cpu but the result was the same temps.But the problem is that my GPU is running at 45 C idle and 72 while gaming.I have removed the botton plastic cover...

Greetings, Something odd happen today and I can't even tell if my whole system is friend or not. While i was testing if the whole system is running just fine (no monitoring and etc) I had all components installed to motherboard and etc with the PSU and after few restarts (force shutdown) from...

People are buying this and he sells the same product x3 times with same description and everything.I just posted this in case anyone would notice and buy it.It's obvious scam