Recent content by blazerbuilder

Hello All, I am not sure the best/fastest ram in this case. Corsair Vengeance RGB Pro 32GB (4x8GB) DDR4 3600 (PC4-28800) C16 or or Corsair Vengence 32GB (4x8GB) DDR4 4000 (PC4-32000) C18 The price is a difference of 50.00 more for the 4000; Any thoughts of the better RAM? Thanks

The cooler used now is the corsair h115i pro rgb platinum. Could that be causing it too. The PSU is Corsair AX1000. I swapped out MoBo. Same model. The first MoBo was having problems and giving a code 00 check cpu ONLY when I installed a second Nvme SSD. And the second drive would not be...

I have a fairly new build. Asus ROG z490 board with intel i9. When I start computer I get a 00 bios error and then the OLED states check CPU. It does that 1x more but the PC boots to windows no problems. I don’t think it’s the MoBo as I was sent a replacement. I ran the intel diagnostics on...

I am still having problems; I sent back drive got an sx8200 pro; same thing; My boot/samsungdrive is in M.2 the new drive is M.1; Again the computer will boot up and run but it flashes 00 error; do I need to format the second drive with a boot; Any help greatly appreciated

So I recently finished my first build. I have a Asus Formula XII. I have one 2TB NvME SSD Samsung evo plus. The system ran well. Recently I installed a second Samsung 2TB Evo Plus.. I formatted it and computer recognizes it but after a few days I started getting a MoBo error 00 “check cpu”...

Yeah thanks,,, I had taken the processor back off thinking I had bent pins. Its running now.. question so the liquid cooling is the optional EK-Quantum Momentum VRM Bridge.. would this replace the corsair 115i chip cooler? and do a better job?

Need some assistance please. Just finished my build...and it did not go to bios/ no display... I have a 10900kf intel with a asus ROG Maximus formula. The computer powers on and all the fans are cycling through nicely... the digital code on the mother board reads 00. The OLED has a "CPU" icon...

Thanks, Yes Agreed. So I placed it in 2. No SATA.. - (Also, you have an NVME so it won't be put in SATA mode so SATA6G_2 won't be affected) Appreciate the info. First build ever so learning on the fly. Installing motherboard in case now. Yeah--progress..

Hello All, I'm in my first build and wanted to knwo where the best Socket is for the Nvme m.2 Panasonic SSD. There are 3 sockets. And here is the info below. Any help would be appreciated... • M.2_1 slot supports PCIe 3.0 x4 and SATA mode Key M design and type 2242 / 2260/ 2280 / 22110...

A new build here ..first time and wanted some feedback from experienced and knowledgeable builders.. I have purchased an ASUS Maximus XII Formula z490. I FINALLY got my 10900K chip in.. However, I am not completely sold on it. Ive been told its a waste if you're not going to liquid cool it...