Recent content by BrownStar

Sorry for the late response, I did read both responses and I appreciate them. After reading them and doing a bit more research on power draw and PSU output I went ahead and installed both, undervolted, and have not had any issues or even a sign of an issue. However, I do have one question, I do...

I have a Zotac RTX 3070 AMP Holo(non-LHR) and an EVGA RTX 2080 XC Hybrid, both 8GB cards, both liquid cooled. System specs with 3070 alone are listed below. I have 3 main questions, but all getting to the same idea: Obviously its possible to run both cards "together", but the idea is to use one...

Pump controller close up Yea ok pretty sure it’s fried

So I have an EVGA RTX 2080 XC Hybrid, factory installed. Anyway I took it apart to do the thermal paste and pads, everything was great, played 7-8 hours of Warzone etc, blah blah blah The connector going from the AIO pump to the radiator fan kept losing connection, had to pinch it or move it...

MY SOLUTION: So I posted this at 3:15am, it’s now 6:45am, and I ran into the problem at around midnight and start trying to solve it then. So… I spent almost 7 hours trying to solve this issue, tore my entire PC apart, rewired EVERYTHING and still didn’t fix it. I laid down to go to sleep and...

I’m not even sure how this happened, all I did was plug my case fans directly to the motherboard vs. being plugged into my Corsair Commander. Now I can’t boot in Windows…. Issue: Stuck on the American Megatrends screen where it says “Please enter setup to recover BIOS, Press F1 to Run Setup”...

Moderator Note: Moving post from Laptop General Discussion to Home Audio. Pinouts, wire colors, etc. are likely more familiar to the audiophile type folks who follow that Category. = = = = I have an dead HP Elitebook 840 G5 laptop with the Bang & Olufsen speakers in it. I've sold or...

Agreed. My 5800x is overclocked to 4.8ghz all core stable and I’ll definitely be overclocking my new 3070ti, my little 1060 SSC is overclocked to +180 core and +1000 mem after thermal paste and pad replacement. This is my area of expertise, PSU and power demands are not. Would you still...

Ok great. Recommendations for budget friendly 1000w PSU?

Ahhh so there’s two PCIe cables with two 8 pin (6+2) connectors. Been awhile since I built this thing and the specs sheets aren’t clear. I do plan on upgrading my PSU, prob something like 1000w Supernova series, but for the next 3-4 weeks will mine be adequate without any power consumption issues?

Here are my current system specs: - EVGA 700W 80+ Gold power supply -Ryzen 7 5800x -Asus ROG Strix B550-f gaming motherboard -4x8 (32gb) Corsair Vengeance 3200Mhz RAM -EVGA GeForce GTX 1060 SSC 6gb GPU Will this PSU work for my new Gigabyte Vision RTX 3070 ti? I have one PCIe cable from PSU...

I built my PC several months back while GPU prices were astronomically high and hard to even get your hands on, so I picked up a slightly used EVGA GTX 1060 SSC 6gb to use until prices and availability are somewhat back to normal and I can grab a 3080-3090 for a decent price. I have a Ryzen 7...

That's what I'm hoping for as well. Hoping they can give me a solution such as commercial service with static IP, a VPN is really my last resort and even then I doubt I'll mess with it. My latency issue has since worked itself out, I'm under 10ms on speed test and usually 20-25ms on Warzone...

I have an EVGA GTX 1060 SSC 6gb that I’ve had overclocked to a stable +125 core and +450 mem for months now. Under load in Heaven benchmark it would average about 72 degrees before new paste and pads. I used Artic MX-4 and Thermal Grizzly Minus Pad 8 (1.5mm thick, cant seem to post pictures...

Do you mean too many people in my household or in my region or everybody they provide service to? If I call them, assuming customer service is capable and willing, is this something that can resolved for free or by paying more for the option?