Recent content by BunnyKraken

Thanks for your reply, so even with the 0.5cm mount thickness I should use the 1cm screws. So 0.4-0.5cm screw length inside the monitor is enough ?

Hi, I have a question about LG vesa screw length. What is the minimum and maximum length that can go inside the monitor. In manual it says to use 1cm screw and in another section it says 0.8mm, so is the 0.8mm the maximum that can go inside the panel without damaging it ? The vesa screws that...

Thanks for your reply, I currently have RTX 3080 and I plan to upgrade it maybe in 12 months. Little worried about the Samsung quality, but the 32'' inch monitor seems like a upgrade. I had the LG GP850-B for a year and it was nice, but I don't know if the others would be an upgrade or similar...

Hi, Which one would you pick for purely gaming 27'' models; LG GP850-B 249€ LG GS750Q 299€ The 27GS75Q is the newer panel but there isnt any good reviews compared to GP-850-B. Samsung Odyssey G5 S27DG502 27" 299€ Also what are your thoughts of the 32 inch versions LG UltraGear 32GS75Q...

I've trying to setup my LG45GR95 and just noticed in BFV there are vertical lines in white snow scenario. Is this a faulty panel or should I try something. I did run the image cleaner once before I noticed this, dont know if I messed it up since it went to power saving mode and I pressed the...

If there is some damage would it be noticeable straight away or did I mess the monitor now. What should I check, could the error manifest later. Also will at affect only the power of the monitor or also the panel itself. Didn't pay enough attention, im always more cautious. Shouldnt the monitors...

Hi, Just got my new OLED LG45GR95 and I plugged the power to the wall and after that into the monitor, was this wrong order. Realized immediately that with some products it should always be power cable to the monitor and then to the power outlet. Could I have damaged something heard a small...

Hi, Would like to ask the correct screws/screw length to vesa mount my LG45GR95 monitor for simracing with VESA. From the manual it says M4 x L10 and When measured from the back of the monitor, the length of each installed screw must be 8 mm (0.3 inches) or less. LG 45GR95QE-B.AUS: Support...

Yes, handbrake + wheel + pedals etc So if there is no eject option I can just unplug it manually ?

Thanks for the reply, but my device is a handbrake not media device or storage. Should this also show as ejectable ?

Thanks, but I dont actually see the eject option in the right corner taskbar ? Only option I see is in settings - devices - remove device. I feel like this would not eject the usb but remove the config or something for the device and I would have to wait for windows/software to re-install it...

Hi, Just curious if USB eject is always recommended for every device. I understand that for USB storage devices its recommended, but how about gaming peripherals like a racing wheel and pedals. I just connected my gaming wheel and handbrake etc to USB and there is no eject in taskbar, so...

Hi, 1.Philips The One PUS 8848 (Direct led) 120hz Price 1079 Euros 2.Sony Bravia X75WL (Direct led) 60hz Price 1199 Euros 3.Samsung Q77C(Edge led) 120 hz 1299 Euros Whats your thought on these tv:s under 1300 euros and in 75". Our budget dont expand to the Sony X90L so we narrowed it to...

Okey, thank you for your time to answer. The shorter screw is 0.95cm long and the longer is 1.10-1.15cm. The vesa backplate is 0.2mm. So the longer screw might go in 0.1mm-0.15mm further with the backplate+washer than the stock screw was originally screwed in. I asume that there is still...

Hi, Installing my first monitor arm (alterzone single fit 17-35") and got the backplate 4x screws off. Im uncertain if I should use the original backplate screws [shorter] or the monitor arm screws [longer] to install the arm? Looking at the manual both seems risky I dont want the monitor to...