Recent content by Conumdrum

Read this thread: http://www.tomshardware.com/forum/264593-29-issues

Not too bad Chef! Think I'll load you up with a bunch of link to peruse. You'd do much better at a few forums with lots more watercooling dicussions. It's in the stickies up top. Please read, join at least OC Forums and read lots. I'm one of the main active WC folks there. But please read a...

H50 is kinda almost watercooling. Weak block for transferring heat, very small rad. It's all about physics. You still need to remove heat by air cooling over the fins in the air cooler or the radiator. The H50 is proven to be less capable than a top air cooler. It's not real watercooling...

Sure. Dunno what watercooling you been looking at. This is real watercooling.

What were the temps a year ago when you bought the PC? Have you overclocked it since then? Have you really blown out the radiator or looked very closely? Dust really collects and if you haven't blown it out in a year... TADA! You learn something new every day. If the rad is clean, the fans...

Please post pics and a full parts list of your watercooling parts. And what additives to the water please.

Thanks rubix, send 'em to me. You poopyhead! 'HUGS'

It is NOT, OMG, NOT a PMW controller. A resistor drops part of the DC voltage to the fan, reducing the voltage to the fan, thus slowing it down. A bit of math to do it right is involved. That is ALL a resistor across the 12VDC input to the fan does. PWM fan control needs a input from a ...

It's nice. I had a tricycle before, it was FAST! Then I saw my buddy fred fly by on a bicycle. If your happy, your stuff is good, be happy. I'm way past a bicycle, you will be before you know it, unless your happy at those incredible performances. You'll want more soon. And your noise is...

Yea your fine. If you would of done your research you wouldn't be asking on these forums to start with. I'll give you a buncha links I made on another forum. Your rad is okay, your will be fine on temps. http://www.overclockers.com/forums/showpost.php?p=6489396&postcount=3 Take your time...

Your temps are fine. Suspect though. If you read around, folks who have the same chip you do run in the 50C easy under load. What do you use for temp monitoring? The stuff that comes with Mobos is junk. Please try Coretemp, and use Prime 95 as your loading program. They are kinda the...

Two 240's stacked is like one 120x3. Stacking is proven to be not....that...good.

Not enough cooling passively for a GTX 580. And you'll be mixing metals, you'll need expensive liquid. Pump is good.