Recent content by culzone

  1. C

    [SOLVED] CPU block compatible with der8uer OC frame?

    EK-Quantum Velocity D-RGB Nickel + Acetal + der8uer OC frame Like will pressure be enough? or do I need to use some custom screws
  2. C

    [SOLVED] 9900k die stain

    View: https://imgur.com/a/KA2HvKH Can this stain here worsen performance? surface does not feel smooth. it is stain from LM. Not sure what to buy to remove the stain here in Europe
  3. C

    [SOLVED] Why does HT off give better OC results?

    So the OC overhead is there because each core does less or because of the temp drop? :) Or maybe a mix of both I guess
  4. C

    [SOLVED] Why does HT off give better OC results?

    Is it because of the temperature decrease of HT? 9900k Z390 aorus master Prime95 no avx Need 1.284v for 5ghz with ht on And with ht off 5ghz 1.236v Both runs around 2 hours each can prob do longer
  5. C

    9900k temps with custom loop 2x 360 rads

    Did you ever find a solution to the high temps? I peak 90C 1.35v with 600mm worth of radiators
  6. C

    [SOLVED] Should I be getting better temps?

    I literally got better performance with my old 360mm aio
  7. C

    [SOLVED] Should I be getting better temps?

    Im running a 9900k at 4.9ghz 1.26v Im reaching temps of around 90C I did some tests earlier on 1.35v and I was hitting 100C after about 10min Prime95 v26.6 Should I be getting better temps? Using the following: 2st 26mm 240mm radiators 1st 26mm 120mm radiator EK-XRES 140 revo D5 PUMP All with...
  8. C

    Question VRM high temps

    put a fan on it and doesen't throttle, atleast for 10minutes now however they are super hot
  9. C

    Question VRM high temps

    Like if i were to put my 9900k on all auto settings, it adds 1.296v and I crash fast
  10. C

    Question VRM high temps

    z390 asrock phantom gaming 6 mobo (12 power phases) 2080 ti with waterblock i9 9900k 4.9ghz @ 1.264v Corsair RMx 750w PSU full custom water loop (2st 240mm, 1st 120mm radiator)(loop together with the 2080ti however it is not under load) I have no VRM sensor but I do think my VRMs are overheating...
  11. C

    [SOLVED] Does adding the extra 4pin EPS12v cable for the cpu power make the VRMs hotter?

    I am currently using both the 8pin and 4pin EPS12V cable for the power to the CPU And the VRMs heatsink is HOT to the touch, if i were to hold my finger for just 1 second, i would burn myself. using z390 phantom gaming 6 i9 9900k rmx750 corsair psu
  12. C

    [SOLVED] Can core voltage alone make you crash?

    Corsair RM750x 750w PSU
  13. C

    [SOLVED] Can core voltage alone make you crash?

    I have experienced some odd things with my core voltage lately. im stable at 1.296v 5ghz on my cpu (did alot of tests for several hours) However adding more voltage should give more stability right? if i wanted to be AVX stable for example. If I go anything above 1.32v I crash within 10...
  14. C

    Question Asrock z390 phantom gaming 6 RAM compatibility

    I felt like doing some tinkering with it just for fun, my XMP is 4266mhz CL19
  15. C

    Question Asrock z390 phantom gaming 6 RAM compatibility

    Is it dangerous to the motherboard to run at RAM frequencies above it's rated max speed? For example my board supports 4300mhz MAX But Im stable above that with my ram kit
See more
COMPANY
RESOURCES
FOLLOW
Top Bottom