Recent content by elgiov

Have you disassembled it and re-pasted it? Maybe the thermal paste is wicked old, or the person who sold it to you just cleaned it up for it to look good and forgot to add the thermal paste. I'd rule that out before continuing with any other testing.

Pc boots this way, but unfortunately no signal to the monitor. Also, the gpu doesn’t even turn its LED lights. I’d rule out a PCIe slot issue, as my 1060 3gb is working fine.

Hello everyone, I recently purchased a SAPPHIRE NITRO+ RX 5700 XT graphics card (used from eBay) and have been trying to get it to work with my Biostar H310MHC2 motherboard, but it simply will not boot. The fans on the card start spinning for less than one second, but then the system auto...

Fixed. Output color format was set to YcBc

Hello everybody. I don't know what's going on, but I can't read anything off my main monitor! This started a few hours ago, and I just can't figure out what caused it. I tried changing the DisplayPort cable of the main monitor (ViewSonic XG2401), changed the DisplayPort port, restarted the PC...

Yes, I can see that now. What do you think about the Ac12g from mercusys? Do you think I will get capped at 10MB/s as well? That one is $45 in my country. Or the Router Nexxt Nyx 1200 Ac, that one is $34 here. Edit: I don't care about wifi speeds, I want ethernet speeds to be not capped at...

I am really struggling with the definition of 10/100 ports. The router said it was 300mbps, so that should give me a download speed of 30MB/s (I suppose) but as it has 10/100 ports it just gives me a 10MB/s download, is that right? Which budget gigabit router do you recommend to me? Thank you...

Hello everyone. I bought a Tenda F3 which says it has: 1*10/100M auto-negotiation WAN port 3*10/100M auto-negotiation LAN ports. When I connect directly to my modem, the download speeds go up to 30MB/s, but when connected through the modem to the Tenda F3 router, the download speed is capped at...

Thanks for the replies. Could you please select a motherboard that will support my new CPU from any of this pages? I would appreciate it very much. https://www.banifox.com/intel/n3_32646/mep/pag/2/ https://thotcomputacion.com.uy/categoria-producto/motherboards/mother-intel/

I bought an i5-9400f today, but it seems that my mother does not support it. When I turn it on with it, it just turns off after less than half a second. My current CPU is an i3-6100. Does a bios update fix the problem? Or I need a new motherboard? If so, which budget mobos should I be looking...

Hello, it's been some days since I put together my PC. The first time I turned it on, it was going great. But when I turned it off, and then on again, it just gets stuck in ASUS black screen, the OS does not come up. It's so frustrating, I have to restart the PC until sometimes it gets past that...

It's an LX