Recent content by Georgeecbkr

  1. G

    Question Airflow in the thermaltake P1 it’s case

    Hey guys I’m thinking of getting the thermaltake p1, z390-I strix, 2080 oc strix, trident z 16GB @ 3600, i5-8600k cooled with the nzxt x62. Now the strix is well known for its great cooling so I’m not so worried about that but will all the other components be cool enough with the open case?
  2. G

    Question How do I safely under voltage the CPU?

    Right I bought some DDR4 2x8gb G Skills Trident Z 4600mhz ram second hand and it works perfectly until I ran into a few blue screens while gaming so decided to underclock it to 3200mhz and it’s been fine ever since, occasionally a game will crash but no BSOD. I then realised that I’ve bought ram...
  3. G

    Question How do I safely under voltage the CPU?

    Actually you’ve got me thinking it may be my motherboard VRMS... i thought they was good in this motherboard but maybe and Aorus mb could handle it a bit better...
  4. G

    Question How do I safely under voltage the CPU?

    Do you have any advice for me pls I need all the help I can get 😂
  5. G

    Question How do I safely under voltage the CPU?

    So do you have any advice for me pls
  6. G

    Question How do I safely under voltage the CPU?

    Thanks for your advice but I was hoping to use the most out of my £300 RAM, if you’re saying I’ve got to use it at 2666 I may as well sell it and get some new sticks That CPU is a few generations ago so would have a different recommended voltage which I’m not sure on and it also is a lot of...
  7. G

    Question How do I safely under voltage the CPU?

    So just lower the voltage to 1.35V and run a stress test at different speeds to see how it works? Also newish to PCs so where does the timings come into it, I know little on that. Also can you recommend and good ram stress test
  8. G

    Question How do I safely under voltage the CPU?

    Right I bought some DDR4 2x8gb G Skills Trident Z 4600mhz ram second hand and it works perfectly until I ran into a few blue screens while gaming so decided to underclock it to 3200mhz and it’s been fine ever since, occasionally a game will crash but no BSOD. I then realised that I’ve bought ram...
  9. G

    [SOLVED] RAM uses too much voltage - HELP

    I’ve only really been into building PCs properly in the last few months. Is it as simple as just lowering the voltage and leaving it at 4600mhz?
  10. G

    [SOLVED] RAM uses too much voltage - HELP

    Right I bought some DDR4 2x8gb G Skills Trident Z 4600mhz ram second hand and it works perfectly until I ran into a few blue screens while gaming so decided to underclock it to 3200mhz and it’s been fine ever since, occasionally a game will crash but no BSOD. I then realised that I’ve bought ram...
  11. G

    Question 4600mhz ram issue

    Mobo: msi z390i gaming edge CPU: i7-8086k @ stock The ram is still running at 1.5v or just slightly over when I checked the bios, has been the whole time so yes it was at the time of BSOD, no more has uccured since I lowered the speed. I didn’t mess with the volts as a rookie I just thought it...
  12. G

    Question 4600mhz ram issue

    Right I bought some DDR4 2x8gb G Skills Trident Z 4600mhz ram second hand and it works perfectly until I ran into a few blue screens while gaming so decided to underclock it to 3200mhz and it’s been fine ever since, occasionally a game will crash but no BSOD. I then realised that I’ve bought ram...